|
Information |
|
240 Clutch Pedal and Master Cylinder Push RodViews : 868 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 27th, 2009, 13:51 | #1 |
New Member
Last Online: Nov 12th, 2009 12:48
Join Date: Sep 2009
Location: london
|
240 Clutch Pedal and Master Cylinder Push Rod
Looking for a clutch pedal and clutch master cylinder push rod.
The pivot hole has worn on mine making the clutch bite point very low. Car is an 89 240 GLT. Cheers, Tom |
Sep 27th, 2009, 21:42 | #2 |
VOC Member
Last Online: Jan 5th, 2020 18:09
Join Date: Aug 2009
Location: Preston
|
Another idea
I know exactly what you mean!!! i had a GLT with the same problem, found the easyest thing to solve the problem was to weld the oval hole op, grind it flat and drill a new hole in the correct position and that solved the issue, then the only problem is then to get use to the higher pedal postiion. Hope this helps!!
__________________
Andrew... 244T '90 740 GLT: Standard car '80 240 DL: Lots of bits and bobs inc turbo intercooler etc etc |
Sep 28th, 2009, 14:57 | #3 |
New Member
Last Online: Nov 12th, 2009 12:48
Join Date: Sep 2009
Location: london
|
Thanks.
I'll see if my local garage will weld those parts up for me. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|