Uneven tyre wear - XC60 D4

Vek · Feb 1st, 2019, 12:22

Hi All

Back from the annual MoT, relatively unscathed but costs coming....anyhow

Rear tyres have uneven tyre wear:
rear left - outside edge 4mm - centre 4mm - inside edge 1.6mm
rear right - outside edge 3mm - centre 3mm - inside edge 1.6mm

Tyres are Pirelli Rosso (R18) and circa 40k which is not a lot for rear tyres. Front tyres are even across so are fine.

Anyone else had issues similar?

Responses much appreciated

Thanks

Whyman · Feb 1st, 2019, 20:24

It's probably the rear alignment that is out, ai had this on mine.

Replace the rear tyres and have a Hunter 4 wheel alignment check done as soon as possible.

Zebster · Feb 1st, 2019, 21:23

I'm getting exactly the same on my V60... rears are down to 2mm on the inside, but 4mm on the outside.

Feb 1st, 2019, 12:22	#1
Vek New Member Last Online: Jul 12th, 2019 16:23 Join Date: Mar 2018 Location: Darlington	Uneven tyre wear - XC60 D4 Hi All Back from the annual MoT, relatively unscathed but costs coming....anyhow Rear tyres have uneven tyre wear: rear left - outside edge 4mm - centre 4mm - inside edge 1.6mm rear right - outside edge 3mm - centre 3mm - inside edge 1.6mm Tyres are Pirelli Rosso (R18) and circa 40k which is not a lot for rear tyres. Front tyres are even across so are fine. Anyone else had issues similar? Responses much appreciated Thanks

Feb 1st, 2019, 20:24	#2
Whyman Premier Member Last Online: Today 09:21 Join Date: Nov 2013 Location: Newark	It's probably the rear alignment that is out, ai had this on mine. Replace the rear tyres and have a Hunter 4 wheel alignment check done as soon as possible. __________________ XC60 2013 D5 215 SE Lux Nav geartronic

Feb 1st, 2019, 21:23	#3
Zebster Upstanding Member Last Online: Sep 12th, 2023 11:29 Join Date: Mar 2018 Location: Ludlow	I'm getting exactly the same on my V60... rears are down to 2mm on the inside, but 4mm on the outside. __________________ GONE: 2015 V60 D4 181 (VEA) R-Design Lux Nav manual in black

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)