745 - 945 External Door Trim Question - Page 2

bob12 · May 16th, 2020, 13:52

Quote:

Originally Posted by Laird Scooby

They're both 1990 745s so no surprise there really. It's hwether the 945 trims will look radically different............

I always seem to miss an important bit of info Dave!!

360beast · May 16th, 2020, 14:30

Quote:

Originally Posted by 90Wine745

Hi Luke,
Great feedback from Bob12 below, I have attached another close up pic of the profile. I also measured them.
Small front 225mm
Font Door 1020mm
Back Door 770mm
All are 47mm high.
Can you double check please?
All the best,
Mike

Will do Mike

90Wine745 · May 17th, 2020, 17:20

Quote:

Originally Posted by 360beast

Will do Mike

Thanks Luke,

360beast · May 17th, 2020, 19:39

Quote:

Originally Posted by 90Wine745

Thanks Luke,

I've been busy today stripping the loom out of it and getting bits out people have bought. I will see if I can get out tonight and measure the trim for you.

90Wine745 · Nov 19th, 2020, 20:45

Not posted for a while but just to finish this off (hope that is OK), they fit perfectly. Thanks so much Luke.
By the way, the ‘screw holes’ were in perfect condition but some very slight deterioration on the doors around the clips, so cleaned as best as possible and then primed. (Car is out in weather most of the time so not bad for 30 years).
Also spent some money on paint job, worth every penny.
Also by the way the scuttle panel from 900 series also fits perfectly. These are the dimensions that I measured…. if you would like to check.
Thanks again Luke.
Best, Mike

First time using post images so hope it works..........
Photos:

poems of encouragement for a friend

360beast · Nov 20th, 2020, 09:23

Glad you're happy with the trim and Scuttle panel Mike, the door looks much better than before!

Nov 19th, 2020, 20:45	#15
90Wine745 Junior Member Last Online: Jan 29th, 2024 21:30 Join Date: Feb 2020 Location: Clare	Not posted for a while but just to finish this off (hope that is OK), they fit perfectly. Thanks so much Luke. By the way, the ‘screw holes’ were in perfect condition but some very slight deterioration on the doors around the clips, so cleaned as best as possible and then primed. (Car is out in weather most of the time so not bad for 30 years). Also spent some money on paint job, worth every penny. Also by the way the scuttle panel from 900 series also fits perfectly. These are the dimensions that I measured…. if you would like to check. Thanks again Luke. Best, Mike First time using post images so hope it works.......... Photos: poems of encouragement for a friend Last edited by 90Wine745; Nov 19th, 2020 at 20:48.

Nov 20th, 2020, 09:23	#16
360beast Go redblock or go home Last Online: Today 20:57 Join Date: Feb 2012 Location: UK	Glad you're happy with the trim and Scuttle panel Mike, the door looks much better than before!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)