|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
![]() |
|
Bouncy front endViews : 982 Replies : 26Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#21 |
Member
Last Online: Apr 25th, 2024 14:24
Join Date: Sep 2021
Location: Bath
|
![]()
If you can move the bush and arm easily in the hole and can see decent gaps around it, it's gone. The newer cross bushes aren't attached as stated above but they shoud be snug in the hole. I have just fitted an entire Meyle unit that cost £30. I can recommend their products in general.
|
![]() |
![]() |
![]() |
#22 |
New Member
Last Online: Apr 24th, 2024 09:44
Join Date: Feb 2023
Location: Lot et Garonne
|
![]()
Upper engine mounting replaced at the weekend and it's not fixed the bounce. Happy enough to buy and fit new front struts, but is there any chance that the lower mounts could be the culprit?
|
![]() |
![]() |
![]() |
#23 |
trying to be helpful
Last Online: Today 17:12
Join Date: Aug 2020
Location: Dagenham
|
![]()
have you tried bouncing the front end up and down by hand? if it takes ages to settle like a big bowl of jelly then yeah it's probably the shocks
if that's not the case, then put the engine up on axle stands under the subframe, grab a solid looking part of the engine and wiggle it about left to right and front to back if it's wobbly left to right then change the mount under the pulleys on the left side (facing the engine from the front of the car) if it's wobbly front to back then it could be the main 2 mounts or maybe it's all 3 ? does it have vacuum mounts and is it possible there's a leak or disconnected pipe or something (mine doesn't I don't have experience with that myself) Last edited by stuart bowes; Mar 25th, 2024 at 16:21. |
![]() |
![]() |
![]() |
#24 |
Premier Member
Last Online: Today 13:33
Join Date: Mar 2017
Location: Manchester
|
![]() |
![]() |
![]() |
![]() |
#25 |
New Member
Last Online: Apr 24th, 2024 09:44
Join Date: Feb 2023
Location: Lot et Garonne
|
![]()
Not sure whether it has the vacuum mounts, I didn't realise it was a possibility until I read about them in the haynes manual.
I'll have to do some more investigating! |
![]() |
![]() |
![]() |
#26 |
New Member
Last Online: Apr 24th, 2024 09:44
Join Date: Feb 2023
Location: Lot et Garonne
|
![]()
Well, the bouncy front end turned out to be a bouncy rear end! Yesterday I was feeling a bad vibration at moderate speed, so stopped in at my local garage. NSR tyre had worn unevenly and in one place down to the core on the inner edge. This was causing the problem and by all accounts, not unusual for Dunlop tyres to have problems near the end of their life.
|
![]() |
![]() |
![]() |
#27 | |
Premier Member
Last Online: Today 16:58
Join Date: Apr 2019
Location: Manchester
|
![]() Quote:
Tyres shouldn't wear unevenly if they're properly inflated and the alignment is within spec. Sounds like some suspension work needs doing. Play in suspension components like control arms and worn out shocks can lead to premature tyre wear. If there's play in suspension, the alignment simply can't be right.
__________________
2007 S80 2.4 D5 - 110,000 miles Last edited by Kev0607; Mar 29th, 2024 at 14:10. |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|