|
140/164 Series General Forum for the Volvo 140 and 164 cars |
Information |
|
B20b oil lightViews : 1023 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 19th, 2016, 14:36 | #1 |
arcturus
Last Online: Apr 10th, 2024 08:21
Join Date: Mar 2006
Location: Sagres Portugal
|
B20b oil light
Hi,I have just noticed that the wire to the oil pressure sensor is missing. The sensor is located on the block just behind where the manifold joins the ex pipe. where should the wire exit the bulkhead and what color should it be. I would like to re connect it for obvious reasons. my wiring diagram is blurry and difficult to follow.
__________________
life's too short to drink bad wine |
Apr 20th, 2016, 13:16 | #2 |
VOC Member
Last Online: Today 13:53
Join Date: Jul 2006
Location: Chatham
|
Does that mean that your oil light comes on with the ignition and stays on? Has it ever worked? I don't know where it comes out of the dash on the PV but a long stray wire should be fairly obvious. Usually red I think. If it is shorted to earth then the oil light will not show.
|
Apr 20th, 2016, 20:41 | #3 |
Junior Member
Last Online: Mar 27th, 2024 10:18
Join Date: Feb 2015
Location: Norwich
|
The Oil Pressure Switch Wire is Black and comes out of the engine bay wiring harness. It normally has a plastic cover over the Black wire both of which can become very brittle and parts and fall off so you may have a short wire hanging down the back of the bulkhead.
|
Apr 21st, 2016, 09:04 | #4 |
arcturus
Last Online: Apr 10th, 2024 08:21
Join Date: Mar 2006
Location: Sagres Portugal
|
sorted,made temporary fix.
__________________
life's too short to drink bad wine |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|