|
Information |
|
Electric antennaViews : 488 Replies : 12Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 27th, 2018, 22:32 | #1 |
Pain in the backside
Last Online: Today 00:21
Join Date: Mar 2007
Location: Newport
|
Electric antenna
One electric antenna, parts clear out. It works, tested it on my 940.
I was intending fitting it but there are no locating studs in the 940. So,fits 740 760, early 960. Is £50 too much posted? Shoot me an offer. |
Jul 28th, 2018, 12:38 | #2 |
Member
Last Online: Sep 10th, 2023 01:20
Join Date: Feb 2012
Location: southampton
|
hi, is this for saloon or estate, and is it mast and motor?
cheers ben |
Jul 28th, 2018, 19:46 | #3 |
Pain in the backside
Last Online: Today 00:21
Join Date: Mar 2007
Location: Newport
|
It's for an estate, mast, motor and drain pipework.
|
Jul 28th, 2018, 21:02 | #4 |
Member
Last Online: Sep 10th, 2023 01:20
Join Date: Feb 2012
Location: southampton
|
thanks, i would be interested in this for my 760, would 30 pound posted be acceptable?
makes no difference but just wondered if it comes with the external body mount as mine was replaced with a static aerial before i got the car therefore dont have this piece regards ben |
Jul 28th, 2018, 21:17 | #5 |
bob12
Last Online: Apr 17th, 2024 22:05
Join Date: Aug 2006
Location: Woking
|
You do need the whole lot as the static and electric aerial estate body mounts (and exterior clamp/finale) are totally different. However, if it comes complete as indicated you have no problems.
|
Jul 28th, 2018, 22:34 | #6 |
Pain in the backside
Last Online: Today 00:21
Join Date: Mar 2007
Location: Newport
|
Phone uploads wont work on here,
So After a long arduous task, Pictured is what will come with the antenna. Hope this helps. https://ibb.co/nNocio External site as photo is about 7 mb. £30 sounds fine. Are you happy with a fiver for delivery and P&P if the antenna is good for you? |
The Following User Says Thank You to monkeh For This Useful Post: |
Jul 29th, 2018, 13:54 | #7 |
Member
Last Online: Sep 10th, 2023 01:20
Join Date: Feb 2012
Location: southampton
|
looks good, not sure if its me being blind but cant see the exterior finisher part, does anybody know if i can buy these separately?
cheers ben |
Jul 29th, 2018, 18:58 | #8 |
Pain in the backside
Last Online: Today 00:21
Join Date: Mar 2007
Location: Newport
|
Im sure I took it off so it should be complete with gasket. Ill check later on and report back.
|
Jul 29th, 2018, 20:55 | #9 |
Premier Member
Last Online: Today 18:45
Join Date: Sep 2014
Location: Bristol
|
It looks from the pic like the black body finisher is on the top of the stalk
So long as the nut is on the top, it looks complete to me! |
Jul 29th, 2018, 23:05 | #10 |
Pain in the backside
Last Online: Today 00:21
Join Date: Mar 2007
Location: Newport
|
Yep, it's complete. Finisher bolt, black trim, Greasy shaft.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|