|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
Help! I've snapped my coil leadViews : 311 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Jan 19th, 2024, 10:52 | #1 |
New Member
Last Online: May 4th, 2024 10:59
Join Date: Sep 2023
Location: Castéra-Verduzan
|
Help! I've snapped my coil lead
Not realising the lead was screwed in, I gave it tug and it snapped off!
Obviously I'll need a new one but I've no idea how to remove the broken item or install the replacement. If there is a kind soul out there who could offer some advise I would be eternally grateful. Cheers Bryn |
Jan 19th, 2024, 11:40 | #2 |
Premier Member
Last Online: Today 00:34
Join Date: Jul 2007
Location: Connecticut, USA
|
Bryn;
Consider yourself (somewhat) lucky!...indeed, it is only the lead itself which has broken, and it doesn't (yet!) mean the Coil/Armored Cable/ Ign Sw Assembly needs to be replaced...this happens when corrosion locks the lead and socket metals together...and the force to remove the connector exceeds its breaking force (it happens, as you now well know and have experienced!). It does not look like the Coil is fatally damaged...the first thing I would recommend is adding a few drops of penetrant oil, then carefully drilling a hole into the (CENTER!) remains of the connector (luckily likely soft brass), into which a screw (like a long drywall screw) could be threaded, which would have hold of the remains, and to which some pulling force could be imparted (from locking on with a locking style pliers, to interfacing to a sliding type hammer), and gently extracting the remains. Don't drill too deep obviously, into the works, but I expect the combination of lube and shock from drilling will loosen its bond, so its just a matter of getting some purchase on it to extract the remains...that's what I'd do... Good Hunting! (...and a friendly piece of advice to all owners: Keep that connector lubed with a light film of just about any kind of grease (to my favorite: ACZP) to prevent this from happening! Don't let the fact that it is an electrical connection stop you from remembering that all mechanical issues are still very much in play!) Finally, know thine own strength when working on old, sometimes brittle, sometimes corroded car components! Last edited by Ron Kwas; Jan 19th, 2024 at 11:42. |
Jan 19th, 2024, 15:42 | #3 |
New Member
Last Online: May 4th, 2024 10:59
Join Date: Sep 2023
Location: Castéra-Verduzan
|
Many thanks indeed for the tip Ron, it worked a treat.
I thought i was in for a considerable period of down time but all is well now. 'Lucie' and I went out for a spin and she ran like a dream |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|