|
140/164 Series General Forum for the Volvo 140 and 164 cars |
Information |
|
Seat removalViews : 555 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 9th, 2021, 12:05 | #1 |
arcturus
Last Online: Today 08:09
Join Date: Mar 2006
Location: Sagres Portugal
|
Seat removal
Does the front seat slide off the rail to the front or does the seat need to be un fastened from rails? on PV it just slides off to the front.
__________________
life's too short to drink bad wine |
Mar 9th, 2021, 12:20 | #2 |
Chief Bodger
Last Online: Today 08:18
Join Date: Oct 2009
Location: Aberdeen
|
Mine has three bolts, one at the front and two at the back either side. Take them out and then lift off. 1/2"spanners required.
__________________
One day I will get rid of all of the rust. |
Mar 9th, 2021, 12:46 | #3 |
arcturus
Last Online: Today 08:09
Join Date: Mar 2006
Location: Sagres Portugal
|
Thanks. It's over five years since I last had them out and I couldn't remember.
__________________
life's too short to drink bad wine |
Mar 9th, 2021, 16:34 | #4 |
Master Member
Last Online: Today 16:19
Join Date: Jul 2020
Location: Saskatchewan, Canada
|
Are you wanting to remove the complete seat assembly from the car or just remove the bottom cushion? If you just want to remove the bottom cushion there are a couple of domed snaps at the front and rear of the bottom of the cushion that retain it to the frame. Pop those snaps off and the cushion lifts out - 30 second operation.
The 3 bolts that I think Burdekin is referring to are correct if you want to remove the seat as a complete unit. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|