|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
![]() |
|
Small clunk noise when sharp turning wheelViews : 2647 Replies : 11Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
R6000CH
Last Online: Jan 18th, 2013 23:09
Join Date: May 2011
Location: London
|
![]()
It only seems to happen lock to lock or round a very slow, tight mini roundabout... Perhaps on occasion over a speed bump. The clunk has a quiet reverberation too, can't determine if it's just on one side, but certainly happening up front.
Any thoughts?
__________________
V50 R-Design Sport SE D5 |
![]() |
![]() |
![]() |
#2 |
Probably Akita's Toyboy..
Last Online: Dec 27th, 2023 22:24
Join Date: Jul 2010
Location: A House.
|
![]()
top mounts? i know mine when it was turned full lock to the right it would clunk only the once though and only on that side it did it constantly on that side everytime after a while.
|
![]() |
![]() |
![]() |
#3 |
R6000CH
Last Online: Jan 18th, 2013 23:09
Join Date: May 2011
Location: London
|
![]()
Interesting, is that one to get worse? What's the damage on that?
__________________
V50 R-Design Sport SE D5 |
![]() |
![]() |
![]() |
#4 |
Probably Akita's Toyboy..
Last Online: Dec 27th, 2023 22:24
Join Date: Jul 2010
Location: A House.
|
![]()
it just got more constant everytime full lock, damage?
|
![]() |
![]() |
![]() |
#5 |
R6000CH
Last Online: Jan 18th, 2013 23:09
Join Date: May 2011
Location: London
|
![]()
Damage, as in to my wallet :-(( Just forked out for 4x new Bridgestone tyres!
__________________
V50 R-Design Sport SE D5 |
![]() |
![]() |
![]() |
#7 |
I've Been Banned
Last Online: Nov 23rd, 2012 12:11
Join Date: Oct 2011
Location: Holme
|
![]()
Mine makes the same noise sometimes, might get it in before the Warrenty expires
|
![]() |
![]() |
![]() |
#8 |
VOC Member
Last Online: Feb 26th, 2016 19:58
Join Date: Aug 2011
Location: Exmouth
|
![]()
The top mounts and bottom rubbers do not cost a great deal, it is the labour charge that would be involved to do the job. You'd be looking at being charged at least an hour to do one side (probably 1.5hrs) if you are unable to do the job yourself that is.
It shouldn't really take more than about 40min a side in reality though. Perhaps taking the 1.5hrs for your first time. Although if there are complications and stubborn bolts then that can eat away time. Daim I'm sure done a how 2 on this recently i think anyway but don't qote me on it. ![]() |
![]() |
![]() |
The Following User Says Thank You to SonyVaio For This Useful Post: |
![]() |
#9 |
New Member
Last Online: Aug 29th, 2012 22:27
Join Date: Aug 2012
Location: Guildford
|
![]()
I've got a similar problem with my s40. A small clunking sound when driving slowly, turning (into my drive/corner) and driving over speed bumps. The car is almost 3 years old, still under warranty, and it has been going back to the garage to get this sorted believe it or not 7 times (it's going back to the garage this Friday, again!). I asked them for print-outs of all the work they’ve done (which freaked out the receptionist!) and I should scan and upload it here; it might help someone who understands more than me!
|
![]() |
![]() |
![]() |
#10 |
R6000CH
Last Online: Jan 18th, 2013 23:09
Join Date: May 2011
Location: London
|
![]()
Sounds ominous. They identified the top mounts being the issue. Due in to be fixed 4th Sept. Fingers crossed they nail it - sounds like an old van going over rough road
![]()
__________________
V50 R-Design Sport SE D5 |
![]() |
![]() |
The Following User Says Thank You to Gucci For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|