|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
![]() |
|
where is EGR ValveViews : 847 Replies : 4Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Last Online: Feb 26th, 2014 16:33
Join Date: Aug 2012
Location: Dumfriesshire
|
![]()
searching through the forum i think that cleaning out my EGR valve could be a worthwhile weekend project.
where do i find the valve i have seen removed pictures but no in situ images |
![]() |
![]() |
![]() |
#2 |
Senior Member
Last Online: May 6th, 2024 19:54
Join Date: May 2011
Location: My Own Little World
|
![]()
Sorry if you've found it already, but I believe this is the EGR valve
EGR Valve Location.jpg But I stand to be corrected if I am wrong! Mike |
![]() |
![]() |
![]() |
#3 |
Member
Last Online: Feb 26th, 2014 16:33
Join Date: Aug 2012
Location: Dumfriesshire
|
![]()
Many thanks for that excellent photo and arrow.
it looks like an easy removal and refit. anything i should know prior to attempting a clean? |
![]() |
![]() |
![]() |
#4 |
OVLOV mad
Last Online: Mar 12th, 2015 19:23
Join Date: Jun 2011
Location: Newbury/Berkshire
|
![]()
Hi. That picture with the arrow, that's not the egr valve. That is merely where the egr pipe from the valve joins the intake system. I believe the valve itself is at the back of the engine. It's worth while taking that aluminium piece off and the pipe work from it to the engine. Took mine off to fit a starter motor, made better access and I was shocked at the build up of grime in there. Lots of petrol or something like that needed to clean all of it out. Going to be doing the intake cover soon but it involves removing the injector pipes and wiring so am a bit nervous in doing it but judging by wot I found in the pipework I'm guessing it's got to be done. There is a way of slowing this build up from occurring by blanking the egr valve off, done some research on this and a guy on ebay sells a plate to do this. It has a small hole to allow minimal exhaust gas to pass so not to generate a fault code but is a lot smaller than the original hole. Worth while mod, done it to my monde and the build up was hugely reduce. Hope this helps u. Chris.
__________________
2003 S60 D5. |
![]() |
![]() |
![]() |
#5 | |
VOC Member
Last Online: May 28th, 2020 23:57
Join Date: Jun 2012
Location: Wolverhampton
|
![]() Quote:
![]() http://www.volvoforums.org.uk/showthread.php?t=127481 The arrow in TheScrew1972's pic is pointing to the mixing chamber, not the EGR ... Last edited by Shadeyman; Dec 25th, 2013 at 18:05. |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|