|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
![]() |
|
Inner tie rod lengthViews : 671 Replies : 9Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Pain in the backside
Last Online: Jun 21st, 2024 15:53
Join Date: Mar 2007
Location: Newport
|
![]()
Is there any of figuring out how long the tie rod lengths are without removal for measurements? There are 2 lengths available...
I plan on loading a parts cannon pre mot as I have a little wheel wobble on braking, I haven't seen any evidence of them being replaced for a long time. Same with the droplinks. I notice that if the mot guys see works been done, they're a little more lenient on "little" things, like leds in places they shouldn't be... |
![]() |
![]() |
![]() |
#2 |
Master Member
Last Online: Jun 16th, 2024 21:50
Join Date: Feb 2021
Location: Mountains
|
![]()
Load some pics while doing that please.
|
![]() |
![]() |
![]() |
#3 |
Pain in the backside
Last Online: Jun 21st, 2024 15:53
Join Date: Mar 2007
Location: Newport
|
![]()
I guess I'll be ticking the "safe order" box on autodoc then.
|
![]() |
![]() |
![]() |
#4 |
Master Member
Last Online: Jun 16th, 2024 21:50
Join Date: Feb 2021
Location: Mountains
|
![]()
Daparto.de is much cheaper. Send them email with your VIN and you get link to right part.
leamforder? |
![]() |
![]() |
The Following User Says Thank You to passenger For This Useful Post: |
![]() |
#5 |
Master Member
Last Online: Jun 16th, 2024 21:50
Join Date: Feb 2021
Location: Mountains
|
![]()
Also AutoDoc works with VIN. Send them email
|
![]() |
![]() |
The Following User Says Thank You to passenger For This Useful Post: |
![]() |
#6 |
Pain in the backside
Last Online: Jun 21st, 2024 15:53
Join Date: Mar 2007
Location: Newport
|
![]()
I have a £70 credit to use from returned parts. I tried VIN lookup but it still threw both lengths at me. I also need an engine mount for the MOT.
For the second time, in the years I've used them, "safe order" tick box got checked! |
![]() |
![]() |
![]() |
#7 | |
Member
Last Online: Yesterday 14:54
Join Date: Aug 2021
Location: Lancashire
|
![]() Quote:
The actual rod part number in the kit I believe is 36825 It has a 34mm 6 sided hex nut compared to the 8 sided one the original had, but that just made my choice of spanner easier. This was for a 2010 XC70 D5 with variable speed power steering rack |
|
![]() |
![]() |
![]() |
#8 |
Master Member
Last Online: Jun 16th, 2024 21:50
Join Date: Feb 2021
Location: Mountains
|
![]()
Made it?
Track end rod you change also? I need to order 2. |
![]() |
![]() |
![]() |
#9 |
Pain in the backside
Last Online: Jun 21st, 2024 15:53
Join Date: Mar 2007
Location: Newport
|
![]()
Not yet, parts were delivered a few days ago. Its pencilled in this week with the droplinks and new arms. I tore the ball joint boot on a new arm! Stupid stupid me!
With a lift kit it's 100 times harder to locate the bottom ball joint into the knuckle. I was careless and I tore the ball joint boot as the prybar slipped! Also whoever did the brake job tightened the locator screw and I sheared it off. Idiot garages! Tuesday or Wednesday, work starts. I'll let you know what comes off.
__________________
'Designed by a computer, built by a robot, and driven by a f***ing nutter' '09 XC70 SE - 2" lift, D5 225bhp, poverty spec '18 V60 Twin Engine R Design - 290bhp Last edited by monkeh; Sep 11th, 2022 at 21:30. |
![]() |
![]() |
![]() |
#10 | |
Pain in the backside
Last Online: Jun 21st, 2024 15:53
Join Date: Mar 2007
Location: Newport
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|