|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
Half shaft pullerViews : 648 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 5th, 2020, 11:07 | #1 |
New Member
Last Online: Jun 3rd, 2021 08:36
Join Date: Jul 2020
Location: Steeple Bumstead
|
Half shaft puller
Anyone have any suggestions for removing the halfshafts from 1880e rear axle?
I’ve seen mentioned a sliding hammer arrangement, but looked on line to see if available. Before making something, I thought I’d check here. Is there a tool hire service in VOC, as with other clubs? Thanks |
Jul 5th, 2020, 12:44 | #2 |
Premier Member
Last Online: Today 11:51
Join Date: Jul 2007
Location: Connecticut, USA
|
Stuart;
Welcome to this Forum! Typically a sliding hammer style puller is used... ...I started writing "after removing Drum (where an approved Puller and techniques are also important!),..." but I rechecked your post and see it is an E, so you will have the discs and a different bearing arrangement in the rear...I don't recall this arrangement so cant give info which will certainly would be incorrect...perhaps a look into a Haynes manual, or another better informed poster will help. Cheers from Connecticut! |
The Following User Says Thank You to Ron Kwas For This Useful Post: |
Jul 5th, 2020, 12:52 | #3 |
VOC Member
Last Online: Today 15:54
Join Date: Jul 2006
Location: Chatham
|
A basic slide hammer with a few fittings can be bought for less than £15 with free postage from Amazon or eBay. Useful to have.
Cross posting this from the boot hinge torsion bars thread. Scroll down here to see a slide hammer being used for axle removal. Yes it is a drum brake axle but you'll get the idea. https://www.volvokv.nl/forum/overige...schap?start=20 Edge will auto translate if you click the box, Google translate will also work. Last edited by Derek UK; Jul 5th, 2020 at 13:18. |
The Following User Says Thank You to Derek UK For This Useful Post: |
Tags |
halfshaft, tool |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|