|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Headlamp washer leakViews : 2401 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 24th, 2013, 18:34 | #1 |
Premier Member
Last Online: Dec 19th, 2021 22:22
Join Date: Dec 2008
Location: Horsham
|
Headlamp washer leak
Hi all
I tried to tag onto an existing thread about washer bottles and leaks but have had no reply, so i thought a new one may be better? Simple question really, can anyone tell me how to access the tube which connects to the headlamp washer as i am sure it has come off. I am getting pools of water underneath the bumper at the offside, and the warning light on the dash comes on after a couple of squirts! Do i have to remove the bumper or is there an easier way? Many thanks for any replies.
__________________
2005 V50 2.0 SE Sport 1999 S40 1.8 Gdi 1993 460 1.7 LX |
May 3rd, 2013, 11:15 | #2 |
Volvophile
|
Can anyone shed some light on this? Got the same issue with the '05 S40 I just bought the missus. Puddle on floor under passenger headlight, washer bottle emptying in no time.
__________________
VOLVO - Invented by Swedes, built by Belgians, driven by GODS!! Currently enjoying an '05 S40 1.8 SE ("Vicky II") |
May 3rd, 2013, 12:54 | #3 |
Avid Member
|
Big job, you need to remove the bumper and some other hard stuff to remove, let me get my Haynes manual out and have a look. Have been told it is a biggy though.
__________________
V50 2.0D (05) SE Lux - Euro IV || 168 BHP - 404 NM V40 D3 (13) SE Lux - Euro IV || 150 BHP - 350NM |
May 3rd, 2013, 12:57 | #4 |
Senior Member
Last Online: Aug 19th, 2018 22:53
Join Date: Apr 2013
Location: Worcestershire
|
defo bumper off im afraid altho its not as tricky as it looks 6 screws in the arch liner each side and 6 top bumper clips and 2 screws take headlights out and bumper pulls off from each side . I had to take mine off to change the main washers not the jets the main bit the jet fits into . it could be just that the pipe has come on at the back were they clip in the clips are not very good like a small plastic horse shoe
|
The Following User Says Thank You to s40manbaz For This Useful Post: |
May 3rd, 2013, 12:58 | #5 |
Senior Member
Last Online: Aug 19th, 2018 22:53
Join Date: Apr 2013
Location: Worcestershire
|
o and you have to take your engine undertray off and the small tray that connects to front bumper/spoiler if you have one that's the hardest bit
|
The Following User Says Thank You to s40manbaz For This Useful Post: |
May 3rd, 2013, 13:01 | #6 |
Avid Member
|
No instructions in the Haynes manual although I think s40manbaz has covered it!
__________________
V50 2.0D (05) SE Lux - Euro IV || 168 BHP - 404 NM V40 D3 (13) SE Lux - Euro IV || 150 BHP - 350NM |
May 3rd, 2013, 15:34 | #7 |
Senior Member
Last Online: Aug 19th, 2018 22:53
Join Date: Apr 2013
Location: Worcestershire
|
o bugger I forgot the main thing lol 1st job before anything else have a beer 1st lol no the 1st thing is take the head lamp washer caps off again easy enough just left them forward a bit get your hand in behind and pull the jet right out and unclip the painted cover
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|