P1800 quarterlight regulator clip for P1800

[charlski]

I'm not sure what it's actually called but I'm looking for the little clip that bolts, beneath the quarter light around the quarter light pivot spike that allows you to add more or less friction to the quarter light when you open it, the bolt for it is accessible from the inside of the door once you remove the trim. Many thanks KC

[agent_strangelove]

There is a double nut set up that pushes up a spring. Do you need the two nuts?

Drop me a note directly and I can email a photo since I will not be on-line this weekend.


Chris

agent_strangelove@hotmail.com

[charlski]

Hi thanks but it's not that it is a clip that fits around the quarter light pivot spike and back into the submerged (inside the door skin) part of the quarter light one end held in place by a single bolt that goes through the same submerged part of the q light the other end.

[agent_strangelove]

My bad... I was thinking of the amazon style window frame setup....

But I pulled out and 1800 frame and looked. I think this is the clip you are after. It's bolted from one side but the tab sort of sticks through the assembly and ends up on the other side. Let me know.

[charlski]

Hi thanks for the reply that is exactly the clip, although I since located one but very much appreciate you searching one out