|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
240 saloon rear lights - does anyone know?Views : 1938 Replies : 11Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Jun 22nd, 2013, 20:52 | #1 |
VOC Member
Last Online: Apr 17th, 2023 20:49
Join Date: Dec 2004
Location: Newquay
|
240 saloon rear lights - does anyone know?
I need to replace the nearside rear light cluster on my 1990 saloon
When I spoke to the chap at Braydons he said that the design changed in 1990 so a 1989 or earlier wouldnt fit - different circuit board on the back and wiring etc. He said that we new cluster from Sweden would be £117+ and a new circuit board IRO £20. A 2+ week wait for both. I have ordered various parts from the 'Scandcar' website on the continent in the past and been impressed with their service...... Looking at their website I see the most recent light cluster is listed as 1985+ (at 109 Euros) http://classicvolvoparts.com/240260/...ort/3a/page/4/ Would I be right in thinking that this one wouldnt fit? Any ideas folks?
__________________
Past Volvos 340's (2), 240 saloons (4), 240 estates (5), 740 estate (1), 760 saloon (1), 940 saloon (1), 940 estate (1) |
Jun 22nd, 2013, 23:31 | #2 |
Torquemeister
Last Online: Yesterday 15:06
Join Date: Dec 2004
Location: Asgard, Cheshire
|
I saw this post after the one in the "Items wanted" section.
There are two configurations for the 6-piece tail-lamp assembly: early and late, but I'm not sure when they changed though I think it was in 1990. Early units have the two tail lamps adjacent, with the stop lamp above the inboard unit and the rear fog under the indicator; late ones have the two tail lamps on the lower tier and separated by either the stop or the rear fog lamp (I don't know which as I haven't seen a "late" 240 saloon for some time)
__________________
loki_the_glt - Skipper of the Exxon Valdez, driver of Sweden's finest sporting saloon - and pining for another Slant-4. |
Jun 23rd, 2013, 18:13 | #3 |
VOC Member
Last Online: Apr 17th, 2023 20:49
Join Date: Dec 2004
Location: Newquay
|
Here is a picture of mine
Braydons havent got back to me about the circuit board - I will chase them up tomorrow. That will be nearly 3 weeks driving about with only one tail light working - if the other one goes before I can get this sorted I will be in trouble. 'Thinks' - as an emergency measure I might stick a flat round rear bicycle LED light on the lens. Better than nothing I suppose. I find this most frustrating, but I guess that its what happens when models such as the 240 get to a certain age - some parts become problematic to get hold of. It wasnt too long ago that you could get things like this within a day or so........ In any event, going by Loki's description I have an earlier version 1986 - 1990 fitted as the stop light is above the rear light. In which case the light cluster shown at the bottom of the page in the Scandparts link posted in my first post should be the right one. Although my car is a 90 - perhaps it was produced just before the change?
__________________
Past Volvos 340's (2), 240 saloons (4), 240 estates (5), 740 estate (1), 760 saloon (1), 940 saloon (1), 940 estate (1) Last edited by Velorum; Jun 23rd, 2013 at 18:31. |
Jun 23rd, 2013, 19:32 | #4 |
VOC Member
Last Online: Today 15:13
Join Date: Jul 2006
Location: Chatham
|
Can we ask what the problem with the light is? If it's dodgy electrical connections on the back there have been some creative but neat solutions applied to this problem. Apparently parts of the circuit board can be carefully cut to make male tags that can be used with standard female connectors and short lengths of wire. Does this sound like it would work with yours?
|
Jun 23rd, 2013, 19:38 | #5 | |
VOC Member
Last Online: Apr 17th, 2023 20:49
Join Date: Dec 2004
Location: Newquay
|
Quote:
My best guess is that the fault relates to a break in the circuit board. The earth for the light unit seems OK as does the wiring leading to it. All other lights apart from the rear tailight work OK. The rear bulb and holder is fine as it works alright when transferred to the other light cluster. My main concern is that the circuit board is old and if one bit has failed then removing it may hasten the demise of other bits - the whole thing is rather flimsy/fragile. Being as the plastic lenses are tired with some cracks etc I would be quite happy to replace the whole unit. If I could be sure as to which one to replace it with that is!
__________________
Past Volvos 340's (2), 240 saloons (4), 240 estates (5), 740 estate (1), 760 saloon (1), 940 saloon (1), 940 estate (1) |
|
Jun 24th, 2013, 15:38 | #6 |
Member
Last Online: Apr 25th, 2024 13:39
Join Date: Jan 2006
Location: Bournemouth
|
Skandix have the units listed for €85 (plus P&P). Would this work ?
http://www.skandix.de/en/spare-parts...-left/1002360/
__________________
Volvo 360 GL ~ Volvo 244 GLE ~ Volvo 240 GLT ~ Volvo 760 Turbo ~ Volvo 760 GLE ~ Volvo 780 Turbo 16v |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|