Rhs head light problem - Page 2

s40 man · Jun 20th, 2015, 21:31

No good at soldering so it would have to be a hole cem

coffeejunky · Jun 21st, 2015, 00:09

Quote:

Originally Posted by s40 man

So if there was a problem with the cem would I still get 12v at the socket and a broken wirer would have no 12v at the socket

Correct. With the bulb removed you would get 12v at the socket. If you get 0v this suggests a wiring issue somewhere. Buying a CEM will not fix the problem if it is a shorted or burnt out wire. The fix for this will be an auto electrician if you are unable to solder. Make sure to point them towards the loom under the radiator.

s40 man · Jun 21st, 2015, 13:56

Was reading on here and some one said about taping the cem so I did and h7 bulb has come alive so it must be the cem to fault so trip to the junk yard next week I think

Jun 20th, 2015, 21:31	#11
s40 man Junior Member Last Online: Aug 12th, 2015 22:25 Join Date: Feb 2015 Location: Langholm	No good at soldering so it would have to be a hole cem

Jun 21st, 2015, 13:56	#13
s40 man Junior Member Last Online: Aug 12th, 2015 22:25 Join Date: Feb 2015 Location: Langholm	Was reading on here and some one said about taping the cem so I did and h7 bulb has come alive so it must be the cem to fault so trip to the junk yard next week I think

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)