PV: Need help new wire harness

[adarvasi]

Happy Easter to everybody!

The wire harness in my PV544 was shot when I bought car, and now we are at a stage of the restoration where the new (VP Autoparts) wiring harness will be installed soon. There are several bundles very well done, color coded wires, crimped terminals, plugs, etc. however the wires are not identified. I do have a colored wire diagrams, but I am having trouble identifying each bundle. Does anybody have any drawing or photographs of bundles with identification, at least what components they are connected to? Thank you for your help.

[arcturus]

Have you tried laying the bundle out on the ground,it should be fairly intuitive. Start off from the fuse block.Does your chart not show in words where each wire goes.For example my chart shows the green going to left hand directional and park light. I will scan one in tomorrow and post if you need.

[adarvasi]

Originally Posted by arcturus

Have you tried laying the bundle out on the ground,it should be fairly intuitive. Start off from the fuse block.Does your chart not show in words where each wire goes.For example my chart shows the green going to left hand directional and park light. I will scan one in tomorrow and post if you need.

Thank you very much Arcturus, I will try that. My chart shows in words and colors where the wires go, the big bundles are not a big issue, the small ones are where I am more confused.