Information: Do You Need A Flash Code Reader Ph2 850

[mr shifter]

im buying a 1995 850 t5, if this is ok for the car then im buying one,
thanks.

[Jod T5]

Originally Posted by mr shifter

im buying a 1995 850 t5, if this is ok for the car then im buying one,
thanks.

Provided it is a Phase 2 850, with the "obd11" port in front of the gear lever then it will work...
Cheers
Jod

[Jod T5]

Originally Posted by Jod T5

Payment received , thanks Steve
Cheers
Jod

Just an update, i will be making another 5 on Monday, two of which are allocated to Steve and Paul....

Any members wanting one better get there order in......

Cheers
Jod

[scr8pdo]

Originally Posted by Jod T5

Just an update, i will be making another 5 on Monday, two of which are allocated to Steve and Paul....

Any members wanting one better get there order in......

Cheers
Jod

Nice one Jod, where can I decode the flash codes, is there a webpage with fault codes or that?

[Jod T5]

Originally Posted by scr8pdo

Nice one Jod, where can I decode the flash codes, is there a webpage with fault codes or that?

Fuel ones are here Steve...http://www.volvoforumsrepairs.org.uk...airs/DtcA2.htm
Cheers
Jod

[Jod T5]

Originally Posted by Jod T5

Just an update, i will be making another 5 on Monday, two of which are allocated to Steve and Paul....

Any members wanting one better get there order in......

Cheers
Jod

Sorry guys but i appear to have go a dodgy set of led's that melt!!
I will get some tomorrow dont fear and will try to get them off them
Cheers
Jod

[scr8pdo]

Thanks Jod fault code reader arrived today, I must say it looks very well made mate, you should get it copy righted, I will give it a go in the next few days, I took my injectors to be cleaned by Jimathen and will be replacing them tomorrow, he told me about letting the ECU reset itself, do I just leave car running for a bit after firing it up?

[Jod T5]

Originally Posted by scr8pdo

Thanks Jod fault code reader arrived today, I must say it looks very well made mate, you should get it copy righted, I will give it a go in the next few days, I took my injectors to be cleaned by Jimathen and will be replacing them tomorrow, he told me about letting the ECU reset itself, do I just leave car running for a bit after firing it up?

You can reset the ECM by resetting the codes or, provided the codes are temporary by removing the ECM overnight...If the codes are permanent you will need to replace or repair the faulty element...
Of course without the reader you will not be able to read the code identity....
Best
Jod

[paul2]

Hi,
I have a 1996 2.5 v70 10v with OBD 11 connector in the compartment between the front seats. could you please tell me if your reader would work. If so I would like to buy one.
Many thanks
Paul

[Jod T5]

Originally Posted by pal2

Hi,
I have a 1996 2.5 v70 10v with OBD 11 connector in the compartment between the front seats. could you please tell me if your reader would work. If so I would like to buy one.
Many thanks
Paul

Hi Paul...The flash code reader will work on your car......Please follow the purchase instructions in the thread...
Cheers
Jod