|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
2005 XC90 Propshaft Removal - Help!Views : 1514 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 30th, 2018, 16:25 | #1 |
New Member
Last Online: Apr 7th, 2024 10:31
Join Date: Nov 2015
Location: Plymouth
|
2005 XC90 Propshaft Removal - Help!
Hello,
I would be really grateful for any advice in trying to remove the propshaft from the angle transfer box - it is stuck. I am trying to replace the splined shaft between the gearbox and transfer angle drive. So far reasonably straight forward but have spent half a day trying to get the remove the propshaft. I have removed the 6 hexagon bolts and followed all of the steps in the various posts and as per the Haynes manual but I just cannot get the propshaft to separate from the coupling. Does the propshaft joint sit inside the coupling i.e. in a cup sort or arrangement? Or is there some sort of locating pin? From all of the posts and information I have read, it sounds like it should almost fall off/out. As space is quite tight I cannot even see how you can drift it apart or use any other tools to separate the joint. Any advice would be much appreciated. I really don't want to give up and put it all back together to then have to pay the stealership or an indi a fivetune (a bit more than a fortune) to fix! Many thanks Rob |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|