turn indicator. - Page 2

minesa240x3 · Apr 18th, 2014, 20:14

Hi there kev that is a fantastic offer but guess what???? I went outside to have a look at the towing sockets that were broke on the metal holding plate,they were being held on by cable ties and to my suprise i noticed the main wiring harness was out of the socket and the wires were touching each other and the bumper saver plate.
So i seperated them,plugged the two bulbs back in and as i pushed the relay switch into the wiring socket it started working.i then switched on the ignition and both indicators now work perfectly.hooray,
I found two nearly new towing sockets at the breakers complete with old fashioned sway bar connector fitted on a 940,If i hadn't got them to replace mine i doubt i would have spotted the wires as they were tucked underneath.
One volvo helping out another!,,,,a bit freaky.
I will be visiting more yards looking for a full size spare alloy as well as an interior tailgate trim panel so the relay will also be on the list just in case.
Very kind of you to offer though very much appreciated.
Brian.

Meerkat Mitch · Oct 16th, 2017, 20:37

i have the same problem with NSF indicator having intermittent fault

2001 v70 2.4 se petrol

Oct 16th, 2017, 20:37	#12
Meerkat Mitch New Member Last Online: Mar 27th, 2018 09:20 Join Date: Aug 2017 Location: Lincoln	i have the same problem with NSF indicator having intermittent fault 2001 v70 2.4 se petrol Last edited by Meerkat Mitch; Oct 16th, 2017 at 20:38. Reason: info

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Apr 18th, 2014, 20:14	#11
minesa240x3 loyalty Last Online: Jul 28th, 2022 19:16 Join Date: May 2006 Location: faraway View Photos By: minesa240x3	Hi there kev that is a fantastic offer but guess what???? I went outside to have a look at the towing sockets that were broke on the metal holding plate,they were being held on by cable ties and to my suprise i noticed the main wiring harness was out of the socket and the wires were touching each other and the bumper saver plate. So i seperated them,plugged the two bulbs back in and as i pushed the relay switch into the wiring socket it started working.i then switched on the ignition and both indicators now work perfectly.hooray, I found two nearly new towing sockets at the breakers complete with old fashioned sway bar connector fitted on a 940,If i hadn't got them to replace mine i doubt i would have spotted the wires as they were tucked underneath. One volvo helping out another!,,,,a bit freaky. I will be visiting more yards looking for a full size spare alloy as well as an interior tailgate trim panel so the relay will also be on the list just in case. Very kind of you to offer though very much appreciated. Brian.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)