Mud Flaps for 64 plate D5

[Yelper85]

Hi all,

Please can you tell me if it's possible to get get genuine Volvo mud flaps (front+rear) fitted to a 64 plate S80?

If so, do you know the part numbers and rough price both for parts and also if I wanted Volvo to fit them for me?

Cheers

Mitch

[37 RUBY]

Hello Mitch

Here you go...

https://accessories.volvocars.com/en...CC-479682/2014

The mudflaps are an easy diy fit it your handy with a torx driver.

Not sure of prices but the full set for my XC70 were just shy of £80 at Stoneacre Chesterfield I fitted them myself.

[Yelper85]

Hi Ruby (guessing that's your name, apologies if not)

Many thanks for that information and link, much appreciated.

I assume you took the wheels off to do this?

Cheers

Mitch

[37 RUBY]

Originally Posted by Yelper85

Hi Ruby (guessing that's your name, apologies if not)

Many thanks for that information and link, much appreciated.

I assume you took the wheels off to do this?

Cheers

Mitch

I

Hello Mitch

Ruby37 is in reference to the 1937 Austin Ruby I had.

There was no need to remove the wheels on my XC70. I used a ratchet spanner in the torx bit. The torx fasteners use existing screw holes of inner arch protectors.

HTH

Cheers

Dave

[Yelper85]

Sincere apologies Dave!

Ok, sounds very easy to accomplish. Time will tell . . .

[oldgreybloke]

I had an email from Volvo offering £40 price reduction on mudflaps

[Tony500]

If your S80 is a non r design you can get a set no problem, if it's a r design forget about it. I cannot get a set to fit my V70 r design and even Volvo don't sell a set. I did find a set I had to mod a good bit to fit but they scraped along the ground and some levels.

[apersson850]

In use.