|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
engine running badViews : 601 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 7th, 2013, 17:40 | #1 |
New Member
Last Online: Sep 14th, 2014 18:15
Join Date: May 2013
Location: chelmsford
|
engine running bad
Hi All, I have a 2005 v50 2.0d which will not rev above 1100. I have replaced the air flow sensor and its the same. The initial problem was that it was running lumpy with masses of smoke clouds, although it had full revs. After replacing the air sensor I thought it might be the electric plugs to the injectors which were soaked in oil so I disconnected them and washed them off with petrol. when they dried I plugged them back in. since then it starts with difficulty, still runs lumpy, & will not rev above 1100. any ideas please.
|
May 7th, 2013, 18:31 | #2 |
Junior Member
Last Online: Sep 15th, 2014 20:23
Join Date: Apr 2013
Location: kent
|
I had poor acceleration. Kept holding back. Took the throttle boby off and gave it a good clean. One of the butterfly valves was stuck closed inside. Bit of wd40 freed it up and now it runs like a dream.
|
May 7th, 2013, 21:14 | #3 |
VOC Member
Last Online: Feb 26th, 2016 19:58
Join Date: Aug 2011
Location: Exmouth
|
This sounds like a split in a boost hose or intercooler/hose.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|