|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
EGR Valve - Cleaning - D5Views : 1795 Replies : 8Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Jan 8th, 2019, 19:38 | #1 |
Member
Last Online: Apr 19th, 2024 10:28
Join Date: Dec 2001
Location: My World
|
EGR Valve - Cleaning - D5
Is it worth stripping and cleaning the EGR Valve? - 2010 D5 with 100k on the clock.
There seems to be lots of posts on here with information for the 163HP engine, but I can't seem to find a comprehensive one for the 185HP lump. Sitting on the fence as too preventative cleaning may stop future issues OR if it ain't broke then don't fix it. Car is newish to me and I will be putting a lot more regular motorway miles on it as compared to previous owners. Comments / views please....and any definitive guides to doing it much appreciated. Cheers.
__________________
Running both a V70 T5 (2006) and XC90 D5 (2011) I have VIDA available if anybody is nearby! Proud Biker - VfrVTEC800 |
Jan 8th, 2019, 20:12 | #2 |
2008 XC90 D5 SE
Last Online: Mar 28th, 2022 20:27
Join Date: Nov 2015
Location: Formby
|
Its worth doing, esp with that mileage on.
Remove the pipe before the EGR on the left of it, and the ETM on the right and you will see carbon build up. Gets lots of rags, lots of carb cleaner and screw drivers. Its a messy messy job. Don't get clearer in the ETM, I'm told it affects the delicate cogs inside. I make it a regular once yearly job now. |
Jan 8th, 2019, 20:16 | #3 |
Senior Member
Last Online: Jan 8th, 2022 15:01
Join Date: Dec 2016
Location: pontefract
|
mines blanked.. has been since i bought it and dont 30k ish
|
Jan 8th, 2019, 20:24 | #4 | |
Member
Last Online: Apr 19th, 2024 10:28
Join Date: Dec 2001
Location: My World
|
Did you take the EGM off or just cover it well?
Thanks. Quote:
__________________
Running both a V70 T5 (2006) and XC90 D5 (2011) I have VIDA available if anybody is nearby! Proud Biker - VfrVTEC800 |
|
Jan 8th, 2019, 20:37 | #5 |
2008 XC90 D5 SE
Last Online: Mar 28th, 2022 20:27
Join Date: Nov 2015
Location: Formby
|
REMOVED THE ETM...
https://www.volvoforums.org.uk/showthread.php?t=94139 its similar to this, EXCEPT, you'll remove the ETM (and the plug in wires) on the right of the 2inch silver EGR valve shown, it has 4 bolts that are hand tight only, and a metal spacer washer (no need to replace unless its bent) Yours will more than likely look as blocked as this one... They do get nasty. Last edited by colinbos; Jan 8th, 2019 at 20:41. |
Jan 8th, 2019, 20:47 | #6 | |
Member
Last Online: Apr 19th, 2024 10:28
Join Date: Dec 2001
Location: My World
|
Yuck.....that's why I'm thinking it's worth doing.
Any tips or tricks ? Obviously battery disconnected before removing ETM I would presume? Are there any gaskets / seals needed elsewhere? Quote:
__________________
Running both a V70 T5 (2006) and XC90 D5 (2011) I have VIDA available if anybody is nearby! Proud Biker - VfrVTEC800 |
|
Jan 8th, 2019, 21:11 | #7 |
XC70 Owner/VOC Member
Last Online: Apr 8th, 2024 15:07
Join Date: May 2016
Location: Montreal, QC
|
Is it a difficult task to do?
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|