|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
Odd ticking sound ..B18Views : 512 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 8th, 2017, 21:25 | #1 |
Master Member
Last Online: Apr 18th, 2024 23:55
Join Date: May 2010
Location: wetherby
|
Odd ticking sound ..B18
On way back home from good wood I was getting an other tick sound only noticeable at idle, not effecting the performance at all...sounds like its coming from rocker cover so guessing can shaft tick or a lazy tappet/ push rod ?
__________________
Clive "Lets turn up the juice and see what shakes loose" |
Sep 8th, 2017, 21:27 | #2 |
Premier Member
Last Online: Apr 2nd, 2021 21:13
Join Date: May 2006
Location: Stockport
|
Check tappets first.
Salut! Pookie
__________________
Growing old disgracefully |
Sep 9th, 2017, 08:51 | #3 |
arcturus
Last Online: Yesterday 07:59
Join Date: Mar 2006
Location: Sagres Portugal
|
That's how my fiber timing gear started off before it disintegrated!
__________________
life's too short to drink bad wine |
Sep 9th, 2017, 16:53 | #4 |
Master Member
Last Online: Apr 18th, 2024 23:55
Join Date: May 2010
Location: wetherby
|
The noise is quite odd and not like tappet rattle. More like a catching type sound.At first I thought it was the fan belt catching or something caught up...but it ain't.
Put stethoscope on engine and checked out dynamo, water pump and the placed it on rocker cover. Noise seems to be from inlet side. Will be well racked off if it is the fibre gear as it is about 4 year old and car has not gone far. Will check it ( fibre gear)when I get a minute. And put stetho on that area. Keep ideas coming
__________________
Clive "Lets turn up the juice and see what shakes loose" |
Sep 10th, 2017, 08:51 | #5 |
arcturus
Last Online: Yesterday 07:59
Join Date: Mar 2006
Location: Sagres Portugal
|
For what it's worth, when my fiber went belly up it started as a tick and quickly got louder and within one km failed. It had lost a tooth and a couple more followed. if yours is still running and only audible at tick over it's probably not the same. I wouldn't start stripping anything down yet.
__________________
life's too short to drink bad wine |
Sep 10th, 2017, 09:05 | #6 |
Master Member
Last Online: Apr 18th, 2024 23:55
Join Date: May 2010
Location: wetherby
|
No mate...its worth loads..and thinking it out the gears noise would use the rover coverto resonate sound. Cannot touch it until a week on Monday and I will try to upload the noise onto you tube...would value your input on this
__________________
Clive "Lets turn up the juice and see what shakes loose" |
Sep 10th, 2017, 09:18 | #7 |
Member
Last Online: Aug 8th, 2023 18:40
Join Date: Oct 2015
Location: Inverness
|
Check your valve springs carefully when you have the rocker cover off. Depending where it has broken, a fractured spring may not be obvious, and may not noticeably reduce power, but can result in a tappety noise.
|
Sep 10th, 2017, 12:29 | #8 |
Master Member
Last Online: Apr 18th, 2024 23:55
Join Date: May 2010
Location: wetherby
|
Thanks Graham...will do
__________________
Clive "Lets turn up the juice and see what shakes loose" |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|