|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
fault codes and messages, Help please.Views : 1902 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 28th, 2017, 12:57 | #1 |
New Member
Last Online: Jun 7th, 2018 16:08
Join Date: Jun 2017
Location: Bideford
|
fault codes and messages, Help please.
hi, i have a V50 1.6d 59 plate,
i had problem with my car last night at work when the car went into limp mode and i had to call the breakdown, i plugged in my OBD II reader in and has come up with these fault code P061b, P193b, P1577 and the car now reads Anti-Skid service required and Engine system service required. I only brought the car 5 months ago and it has a just been through a service then. any advice would be appreciated and rough costs as well (if poss) thanks in advance. |
Jun 28th, 2017, 13:01 | #2 |
VOC Member
Last Online: Apr 18th, 2024 21:35
Join Date: Jan 2007
Location: YORK
|
Probably the well known syndrome of the disturbed CEM...
Search on here and you'll find lots about it: basically check that all the connections to the CEM are firm and dry. It lives under the dashboard above the passenger foot-well, has little protection (just a thin covering piece of material) gets easily kicked and is removed to change he cabin filter (you say car had a service recently). On what you describe I would be pretty certain that's the answer to your problems. David
__________________
VOC 400 Series Register Keeper The current fleet: 1997 440 LE, 1996 460 CD, 1994 480 GT and 2007 V50 SE Sport |
The Following 3 Users Say Thank You to dcw For This Useful Post: |
Jun 29th, 2017, 13:03 | #3 |
New Member
Last Online: Jun 7th, 2018 16:08
Join Date: Jun 2017
Location: Bideford
|
i have looked and all the connectors are as they should and are all dry.
i check my brake fluid level and that's full. weirdly the lights have not come on this morning as i drove to work and the car drove fine! (fault code are still present though). |
Tags |
fault codes, limp mode, messages, v50 1.6d |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|