|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Powershift problemViews : 16025 Replies : 76Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 1st, 2017, 14:15 | #71 |
New Member
Last Online: Mar 4th, 2019 13:02
Join Date: Sep 2015
Location: Timisoara
|
Thank you very much.
Then I'll go with there repair here. This shop where I'm taking it, althought it is in a different city, is specialized in automatic gearboxes, they fix them for a few years now, I saw even a Bentley in their shop, and heard they fix Ferrari boxes as well (now this might be bogus, as a Ferrari owner with gearbox issues might not take it for repair to any shop). They also seemed to be familiar with Powershift boxes, they grant 1 year warranty for their work without mileage limit, so hopefully it will turn out fine. |
Feb 1st, 2017, 22:54 | #72 | |
Premier Member
Last Online: Oct 29th, 2020 23:25
Join Date: Sep 2015
Location: Midlands
|
Quote:
All the best
__________________
2008 S40 2.0d R design auto powershift |
|
Mar 13th, 2017, 11:19 | #73 |
New Member
Last Online: Mar 4th, 2019 13:02
Join Date: Sep 2015
Location: Timisoara
|
A bit of update for anyone interested. My car is still at the repair shop, after ~1.5 months. Not happy about that. But, they say it's fixed, and I'll get it back in a few days. Clutch was replaced. That was the problem they say. 2000 euros total repair cost.
|
Mar 13th, 2017, 21:57 | #74 |
Premier Member
Last Online: Oct 29th, 2020 23:25
Join Date: Sep 2015
Location: Midlands
|
2000 euros sounds about right for a DMF. Hopefully it's sorted
__________________
2008 S40 2.0d R design auto powershift |
Mar 16th, 2017, 14:48 | #75 |
New Member
Last Online: Mar 4th, 2019 13:02
Join Date: Sep 2015
Location: Timisoara
|
Got the car back today. Works fine, better than before. There is still that clunk when shfting from 1 to 2, but now I think it related to something else than the gearbox.
|
Apr 26th, 2017, 09:20 | #76 |
New Member
Last Online: Mar 4th, 2019 13:02
Join Date: Sep 2015
Location: Timisoara
|
Hello,
Not sure if it's still related to Powershift (I hope not), but something weird happened today: while standing still, in Drive position, with the brake pressed, suddenly the car started shaking, and I heard a sound like that when the engine shuts off by itself, and then it got back to normal in a matter of a second or two. After that it worked normally, a few more kilometers until my destination. Any idea what it could be? |
Feb 11th, 2019, 10:55 | #77 |
New Member
Last Online: Mar 4th, 2019 13:02
Join Date: Sep 2015
Location: Timisoara
|
Hello!
After aprox two years of working good, my Powershift has done it again 1.5 months ago, at the end of Dec 2018. While driving slow is a traffic jam, suddenly started to shaken seriously when switching to second gear, and after a few times of that, an error appeared (german language, didn't got to note it down), and it stopped changing gears. I had to drive back home a few miles only with 1st gear. I haven't moved it since then. So I got myself a dice a few days ago, and investigated the error. I got what is says in the attachments. so I have a few questions 1. Does anyone know what exactly that means? 2. Vida says it might be either oil level low, some defective sensor, or defective solenoids. But I can't see any oil leaks in there, and the solenoid didn't errored out on the tests did to itself after that. 3. I didn't moved the car since then, but giving what I found, would it be safe to give it another road test to see if either works fine or the error comes back? I have recorded the vida diagnostics, but being the first time with vida and dice, you might find it boring. But you can look at around 4:15, when I got the error and digged into it. At around 6:05 you can see the frozen values at the time of the incident. At around 8:15 you can see the error description https://www.youtube.com/watch?v=sNMtDNZtpPU Any help would be greatly appreciated. Thanks Last edited by ronell; Feb 11th, 2019 at 11:03. |
The Following User Says Thank You to ronell For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|