M90 gearbox - Page 3

Jim760 · Jun 10th, 2010, 16:38

auchlinn please see pm

Burdekin · Jun 10th, 2010, 19:45

Hi Jim,

I don't know much about the models either but the 2.3l will fit the redblock engine so no good for me unfortunately.

Goodluck,

Mitch

foggyjames · Jun 12th, 2010, 21:30

Jim - just a quick "heads up" - you'll need the flywheel from a manual Motronic car. That's pretty much *got* to be a 740 Turbo. Unfortunately, I believe I took our one to the scrap yard a few weeks ago (not being able to think of a situation where it might be useful), but I'll make sure it's not still here.

If all else fails, you could make one pretty easily...one from a manual 240 (plain) is probably best. You just need to put a peg in the right position to be a TDC sensor.

cheers

James

Jun 10th, 2010, 16:38	#21
Jim760 Mr G Last Online: Jun 12th, 2020 19:11 Join Date: May 2007 Location: north yorkshire	auchlinn please see pm __________________ will the jimousine ride again? previous models 940 TDI360 GLT 480 ES 740 GLE 940 SE 760 Executive 940 GL 850 GL 760 TIC V70 Torslanda

Jun 12th, 2010, 21:30	#23
foggyjames 300 Register Keeper Last Online: Today 01:27 Join Date: Dec 2001 Location: Nottingham	Jim - just a quick "heads up" - you'll need the flywheel from a manual Motronic car. That's pretty much got to be a 740 Turbo. Unfortunately, I believe I took our one to the scrap yard a few weeks ago (not being able to think of a situation where it might be useful), but I'll make sure it's not still here. If all else fails, you could make one pretty easily...one from a manual 240 (plain) is probably best. You just need to put a peg in the right position to be a TDC sensor. cheers James __________________ VOC 300-series Register Keeper '13 V70 D4 SE Lux '89 740 Turbo Intercooler '88 360 Turbo Intercooler '84 360 GLT '81 343 GLS R-Sport '79 343 DL '70 164

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Jun 10th, 2010, 19:45	#22
Burdekin Chief Bodger Last Online: Yesterday 22:31 Join Date: Oct 2009 Location: Aberdeen	Hi Jim, I don't know much about the models either but the 2.3l will fit the redblock engine so no good for me unfortunately. Goodluck, Mitch

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)