|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Electric diagram under selector panelViews : 444 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 17th, 2019, 09:54 | #1 |
New Member
Last Online: Jun 18th, 2019 21:15
Join Date: Jun 2019
Location: COOLUM BEACH
|
Electric diagram under selector panel
Hi,
Firstly g'day I'm new to this Volvo forum, I've recently bought a 2003 XC90 2.5T inherited a few problems but I've fallen in love with the car so I shall endeavour to fix and keep her forever : ) I thought I would perform a Simple task today to replace the faux leather gear gaiter : ( but while pulling up the gear selector knob I managed to wrench out two of the four electrical connections from the grey connector behind and under the gear selector and plate, which one goes where ?? anyone have a diagram ? I also now have the message " gear selector reduced function " : ( damn I wish I had left the manky gear gaiter boot alone : ) Any help would be great with a picture or two, Andrew |
Jun 17th, 2019, 14:42 | #2 |
XJS Driver
Last Online: Apr 22nd, 2024 23:00
Join Date: Apr 2017
Location: Hitchin
|
Hi,
You are not alone - have done this type of things many times! At least once sorted you will know a little more about the car. I have found 2 pictures - not very clear I'm afraid but from memory there is just the one ribbon cable attached to the gaiter surround. |
Jun 17th, 2019, 22:05 | #3 |
New Member
Last Online: Jun 18th, 2019 21:15
Join Date: Jun 2019
Location: COOLUM BEACH
|
Thank you,
I still have the ribbon attached/intact but I have two sets of black sheathed wires, two wires in each and one set is connected directly behind the gear shift housing between cup holder but two ( one green wire and one black wire ) has come unattached and I don't know where they go : ( Last edited by Andypick; Jun 17th, 2019 at 22:38. Reason: Add another picture |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|