|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
C70 d5 180 hp popping noiseViews : 404 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 26th, 2018, 23:28 | #1 |
Junior Member
Last Online: Sep 4th, 2019 15:42
Join Date: May 2017
Location: So'ton
|
C70 d5 180 hp popping noise
Hi, my d5 started to make popping noise from oil filler like in video attached below, difference is that i have newer engine than video shows. When i have asked about local volvo specialists they have said its look as normal as other d5 makes the same noise. I think it could be vacuum issues as i have quite poor fuel consumption which drops to 15mpg - city drving where kn motorway is brilliant up to 60mpg!
https://youtu.be/eRTq9WSTYrs Another problem is that as my car vibrate a bit when reach 20 miles if u go above there is everything ok i have replsced one of the driveshaft which caused constant vibration which dissapeared but little vibration at 20mph exists. Is there anyone in hampshire who can check that for me and suggest something or fix issue? Thanks Last edited by S402002; Oct 26th, 2018 at 23:53. |
Oct 27th, 2018, 00:30 | #2 |
New Member
Last Online: Jul 12th, 2020 23:54
Join Date: Sep 2013
Location: edinburgh
|
Hello , i think your popping sound could be knackered vacuum engine mounts , hope that helps
|
Oct 27th, 2018, 00:38 | #3 |
Junior Member
Last Online: Sep 4th, 2019 15:42
Join Date: May 2017
Location: So'ton
|
Thanks, problem is that i have no idea where to go for a check when i have asked in local garage they looked at me like idiot in front of.
|
Oct 27th, 2018, 01:38 | #4 | |||
FCW Auto Service
Last Online: Yesterday 23:31
Join Date: Feb 2015
Location: Gloucester
|
You should be able to work out what the problem is from SiRobb/Chesired's video below:
You'll most likely need a new engine mount fitting. |
|||
Oct 27th, 2018, 10:16 | #5 |
Junior Member
Last Online: Sep 4th, 2019 15:42
Join Date: May 2017
Location: So'ton
|
I have seen that vid butbmy engine is much newer than that on vid. On a video is old 163hp mine is 180 with electronic turbo steering so its not activated by vacuum. Engine bay looks much different and i have no abilities and no conditions to check
Last edited by S402002; Oct 27th, 2018 at 10:20. |
Oct 27th, 2018, 10:52 | #6 |
New Member
Last Online: Feb 10th, 2021 11:14
Join Date: Oct 2018
Location: Frankfurt
|
did you check the oil separator next to the oil filter?
maybe the c70 is different, but atleast my v50 does not have any vacuum stuff exept for the brake booster |
Oct 27th, 2018, 11:41 | #7 |
Premier Member
Last Online: Today 15:14
Join Date: Mar 2017
Location: Manchester
|
vac engine mounts are easy to spot when you take off the under engine cover . one at the rear near the turbo one at the front . they are quite big and have a cone shaped top . the rear mount is larger than the front .if you have them and need to replace. hope this helps you decide if you have them
|
Oct 27th, 2018, 21:54 | #8 |
Dave
Last Online: Sep 7th, 2023 11:33
Join Date: Apr 2016
Location: East Yorkshire
|
Didn't think the P1 platform D5s had vacuum engine mounts to be honest?
Wobble could be the other driveshaft or the rear wishbone bushes being shot.
__________________
V50 D5 'Thor' |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|