|
Information |
|
16T turbo for saleViews : 585 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 22nd, 2019, 12:02 | #1 |
Senior Member
Last Online: Mar 1st, 2024 08:41
Join Date: Mar 2009
Location: London
|
16T turbo for sale
Hi all,
Yesterday I went from a 16T to a 19T. My 16T is now for sale. No play in/out or up/down. No oil passing the bearings as seen by my inlet pipe. Has been run @ 10psi low boost and 16psi high when I felt like being a bad person lol. Note this is just the CHRA / Core. No water pipes/oil bits ect. This will mate to a standard 13c hotside. £70 inc postage UK. Or pickup from West London. Few pictures of it being removed so you can check what your car looks like. Was fitted to my 98 940 2.3. Clearly not what it came with. Note when you install using your inlet cold side housing you might need to cut off a pin. I used my bench drill with a saw blade and carefully cut it off. plus a tool is needed to remove/install the snap ring (from your turbo). I used the laser tool but tbh it twisted badly because it's **** but it just did the work. Ta Martin |
Aug 24th, 2019, 19:35 | #2 |
VOC Member
Last Online: Apr 12th, 2024 16:38
Join Date: Jun 2009
Location: Swineshead/Salford
|
nope
It will not mate to a standard 13c hotside. You'll need a 15g or upwards hotside.
__________________
new engine! new car! |
Aug 24th, 2019, 20:07 | #3 |
Master Member
Last Online: Apr 13th, 2024 22:46
Join Date: Dec 2007
Location: Norwich
|
Hi, so with just a standard 13 on the car, what else would I need to make this fit? Will pipes all line up? Will the standard actuator work with it?
Thanks |
Aug 24th, 2019, 20:08 | #4 |
Master Member
Last Online: Apr 13th, 2024 22:46
Join Date: Dec 2007
Location: Norwich
|
|
Aug 27th, 2019, 10:01 | #5 |
Senior Member
Last Online: Mar 1st, 2024 08:41
Join Date: Mar 2009
Location: London
|
Thanks for correcting. :-)
|
Aug 28th, 2019, 21:44 | #6 |
Master Member
Last Online: Apr 4th, 2024 17:58
Join Date: Oct 2015
Location: watford
|
i have a spare 15g which can be had cheap,,,,
|
Aug 29th, 2019, 10:08 | #7 |
Senior Member
Last Online: Mar 1st, 2024 08:41
Join Date: Mar 2009
Location: London
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|