Suspension: - Advise on changing xc90 rear bearing assembly

emol20 · May 20th, 2009, 21:44

Hi, I'm about to embark on changing one of my wheel bearing hubs on the rear of my xc90 2003 (51k miles). As far as I can see the operation is fairly straight forward and involves removing the caliper and then the hub assembly which may require some firm knocks to break free from corrosion. Am I missing anything in the procedure?

Also, can anyone advise the torque settings of the bolts and is loctite recommended?

Hifive · May 21st, 2009, 12:23

Nothing on the actual bearing I'm afraid, but heres some info on torque settings.
Regards,
Mark.

Torques.

andymuggwump · Jun 3rd, 2010, 13:20

Can anybody just clarify the torque settings for the center hub bolt and the four bolts on the new hub/bearing assembly. I have the car in bits at the moment

GJB · Jun 5th, 2010, 18:55

Quote:

Originally Posted by emol20

Hi, I'm about to embark on changing one of my wheel bearing hubs on the rear of my xc90 2003 (51k miles). As far as I can see the operation is fairly straight forward and involves removing the caliper and then the hub assembly which may require some firm knocks to break free from corrosion. Am I missing anything in the procedure?

Also, can anyone advise the torque settings of the bolts and is loctite recommended?

Suggest you look at this thread http://www.volvoforums.org.uk/showth...wheel+bearings

May 20th, 2009, 21:44	#1
emol20 New Member Last Online: Jun 28th, 2009 08:41 Join Date: May 2009 Location: Hockley	Advise on changing xc90 rear bearing assembly Hi, I'm about to embark on changing one of my wheel bearing hubs on the rear of my xc90 2003 (51k miles). As far as I can see the operation is fairly straight forward and involves removing the caliper and then the hub assembly which may require some firm knocks to break free from corrosion. Am I missing anything in the procedure? Also, can anyone advise the torque settings of the bolts and is loctite recommended?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 21st, 2009, 12:23	#2
Hifive If it aint broke... Last Online: Aug 25th, 2016 17:47 Join Date: Mar 2009 Location: Waterford, Ireland.	Nothing on the actual bearing I'm afraid, but heres some info on torque settings. Regards, Mark. Torques.

Jun 3rd, 2010, 13:20	#3
andymuggwump Junior Member Last Online: Apr 21st, 2012 10:31 Join Date: Apr 2010 Location: nowhere fast	Can anybody just clarify the torque settings for the center hub bolt and the four bolts on the new hub/bearing assembly. I have the car in bits at the moment

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)