|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
v50 Anti skid error.Views : 811 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 18th, 2017, 14:38 | #1 |
New Member
Last Online: May 22nd, 2018 21:31
Join Date: Aug 2017
Location: Dundee
|
v50 Anti skid error.
Afternoon folks,
I have just bought my first T5 and love it. However I have had the antiskid temp not available error pop up a couple of times. Had the codes checked and came back with: BCM-0082 Yaw rate sensor off set value ECM-9400 brake pedal sensor - signal missing ECM-940F Brake pedal sensor - signal missing EPS-0081 Vehicle speed faulty signal. Tech said these were intermittent and none were active at the time. Any body know what may be causing these? Thanks |
Aug 18th, 2017, 15:17 | #2 | |
WowIcanwriteAnythingHere!
Last Online: Mar 26th, 2024 16:05
Join Date: May 2016
Location: Dublin/Meath
|
Quote:
Vehicle speed code may be related to ABS sensors on each of the wheels - those provide accurate readout of every wheel's RPM. If any is wrong, it may trigger the error. Would be good to hook it up to diagnostic tool while driving and check if the speed is reported properly - it could tell you if any of them is faulty Brake pedal sensor - as per description, although I have no clue where that is, I would imagine if that gives a faulty signal or readout, system deactivates to "safe mode" until next car's restart. Yaw sensor - is located under driver's seat. There is a bunch of wires under the carpet going into it and it is responsible for DSTC system (dynamic stability control). Simplest thing to do - check if the connector is properly seated, no loose or broken wires maybe. What you are describing may be related to 1 actual issue that is triggering all those faults (its like domino effect where lack of 1 sensor causes another sensor to not work either and disabling one of car's component). Not sure how to help you any more, but see what faults come back after a while and try to narrow down the search. Do you know what equipment was used to check the codes? Volvo's diagnostic Vida+Dice or generic reader?
__________________
2005 V50 T5AWD M66, Stage1 Hilton tune E-focus torque mount, E46 bi-xenon retrofit v2 , (also available in PDF form), DTSC fully-off mod, Brembo discs+ATE ceramic pads |
|
Aug 18th, 2017, 15:53 | #3 | |
New Member
Last Online: May 22nd, 2018 21:31
Join Date: Aug 2017
Location: Dundee
|
Quote:
Will keep an eye out and get him to read them again if anything pops up. Googling antiskid gives you a lot of horror stories so just trying to catch anything before it gets expensive. |
|
Aug 18th, 2017, 16:36 | #4 |
WowIcanwriteAnythingHere!
Last Online: Mar 26th, 2024 16:05
Join Date: May 2016
Location: Dublin/Meath
|
Yes, it may be a big issue or a small wire that went loose trigerring all weird errors, hopefully it wont come back or if it does - you will get to the bottom of it.
__________________
2005 V50 T5AWD M66, Stage1 Hilton tune E-focus torque mount, E46 bi-xenon retrofit v2 , (also available in PDF form), DTSC fully-off mod, Brembo discs+ATE ceramic pads |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|