|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Bedevilled jobsViews : 985 Replies : 19Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Apr 15th, 2019, 21:56 | #1 |
Junior Member
Last Online: Sep 4th, 2023 19:01
Join Date: Dec 2010
Location: Birmingham
|
Bedevilled jobs
Have you ever started on a simple job that seems like it has a curse on it?
My offering is a refurb of two virgo alloy wheels, started last June and not quite finished now. It was supposed to be a simple rattle can job with a good brushing off with wire brush and a decent finish by means of layers and wet n dry. Started in June 2018. Aborted as they were tatty and I ran out of time just prepping. Resumed August but aborted as family member was admitted to hospital in an emergency. Almost resumed in November but rattle cans had become buried in a house move. Resumed in March, by now mice had nibbled the paint so it needed taking back to primer. Corrected that but ran out of time for lacquer. April, applied the lacquer to find that it drew yellow primer through to the surface in patches. Corrected that this weekend, but a water pipe burst as the lacquer was curing and it peppered one wheel in little droplets. So one down, one to go! |
The Following User Says Thank You to daveo2002 For This Useful Post: |
Apr 15th, 2019, 22:36 | #2 |
Premier Member
Last Online: Today 17:55
Join Date: Jun 2016
Location: S****horpe
|
By the heck I've done no end of "5minute"jobs that ended up taking more hours than expected,but never 10mths
|
Apr 15th, 2019, 22:51 | #3 |
bob12
Last Online: Today 11:19
Join Date: Aug 2006
Location: Woking
|
Too many to describe
|
Apr 16th, 2019, 10:34 | #5 | |
Premier Member
Last Online: Today 23:24
Join Date: May 2012
Location: Lakenheath
|
Quote:
I wasn't beset by so many "external" disasters as you but i found firstly the wheel was originally rough cast (after sanding through 2 coats of lacquer, 2 of colour, one layer of normal primer, another layer of filler primer that was obviously flatted after application and finally a layer of etch primer) so it had a "mottled" effect on the surface. After sanding through that and using progressively finer sanding discs, i finally got to a mirror shine but then found other casting imperfection such as gouges so took the decision to paint it instead. Since then it moved a bit quicker! Here's a few pics to fill the gaps : What i started with ^^^^^ The "mottled" effect. I did get a presentable shine and then i found these : Gouge marks only visible after sandblasting the "square holes". Decision taken, paint all the way : Not perfect, a couple of "time worn" battle-scars left for character but most imperfections removed or "hidden" under layers of primer, paint and lacquer, awaiting a final coat of lacquer which it's now had and arrival of a replacement tyre. The whole process took about 6 weeks, a lot of blood, sweat and tears and a steep learning curve despite having previously refurbished alloys before : From that ^^^^^ to this : Those took considerably less than 6 weeks (about 6 days in total) for all 5 of them, including fitting the tyres and getting them on the car. Some jobs just go pear-shaped from the start, fortunately not all of them!
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following User Says Thank You to Laird Scooby For This Useful Post: |
Apr 16th, 2019, 11:03 | #6 | |
VOC Member
Last Online: Oct 4th, 2022 16:02
Join Date: Jan 2016
Location: UK
|
Quote:
|
|
The Following User Says Thank You to 827Roverman For This Useful Post: |
Apr 16th, 2019, 17:36 | #7 | |
Premier Member
Last Online: Nov 23rd, 2023 14:26
Join Date: Jun 2014
Location: Haltwhistle
|
Quote:
Send them to me for spares, I use Virgos. And mice eating wheel paint? Beelzeebub indeed.
__________________
1993 2.0 Turbo SE with 1991 2.0 Turbo engine. Older is better! |
|
The Following User Says Thank You to Dirty Rooster For This Useful Post: |
Apr 16th, 2019, 20:32 | #8 |
Master Member
Last Online: Oct 8th, 2022 22:22
Join Date: Sep 2016
Location: Auckland
|
suddenly, 40 quid a wheel to have them done professionally makes a lot of sense.
Just to make you feel bad, last weekend I stripped an old Cannondale road bike frame (aluminium, an R600 3.0 series for anyone in the know), sanded, etch-primed and painted the fork gloss red, same to the frame except in chalk finish charcoal, then rebuilt it with the parts of another Cannonsnail (2.8 series 650C frame) that had run its course. First ride last night. In my defence, all the stuff had been sitting since last November... |
The Following User Says Thank You to aardvarkash10 For This Useful Post: |
Apr 16th, 2019, 20:37 | #9 |
Master Member
Last Online: Oct 8th, 2022 22:22
Join Date: Sep 2016
Location: Auckland
|
as it says...
|
The Following User Says Thank You to aardvarkash10 For This Useful Post: |
Apr 16th, 2019, 20:49 | #10 | |
Premier Member
Last Online: Today 23:24
Join Date: May 2012
Location: Lakenheath
|
Quote:
Besides, there's something satisfying about doing it yourself.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|