Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > PV, 120 (Amazon), 1800 General > PV, 120, 1800 Wants

Notices

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

D type overdrive output flange and short prop

Views : 652

Replies : 8

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Feb 19th, 2019, 00:23   #1
JP 1800
Master Member
 

Last Online: Today 00:15
Join Date: Aug 2009
Location: Dublin
Default D type overdrive output flange and short prop

I have an earlier m41 with the type 1 u shaped output flange, I am looking for a later type circular flange and also a short front prop.

Thanks
JP 1800 is offline   Reply With Quote
Old Feb 19th, 2019, 21:18   #2
Volvo_133
VOC member
 

Last Online: Yesterday 20:16
Join Date: Jan 2008
Location: Sheffield
Default

I have a box full of used M41 gearbox parts. Will have a look asap for an output flange.
Chris
Volvo_133 is offline   Reply With Quote
Old Feb 20th, 2019, 00:19   #3
JP 1800
Master Member
 

Last Online: Today 00:15
Join Date: Aug 2009
Location: Dublin
Default

Many thanks for the effort, it is for my 1969 133, I have taken the 4 speed and replaced it with an overdrive unit from an early 1800 which uses a UJ type flange.I need to source a short prop or chop mine down.
JP 1800 is offline   Reply With Quote
Old Feb 23rd, 2019, 22:01   #4
amazon69
Premier Member
 

Last Online: Mar 26th, 2024 19:07
Join Date: Jan 2006
Location: Falmouth
Default

Fwiw I think it's easier to have yours chopped, that's what I did, it's easy to measure, not expensive to get done, and you can put all new U/J's etc in at the same time.
__________________
Falmouth, Cornwall.
1970 California white 131.
amazon69 is offline   Reply With Quote
Old Feb 24th, 2019, 17:45   #5
Volvo_133
VOC member
 

Last Online: Yesterday 20:16
Join Date: Jan 2008
Location: Sheffield
Default gearbox output flange.

Hi JP,
I have found a flange in my box of used M41parts. It is the type which has 4 bolt holes at unequal centres. I would have thought your 1969 133 would be fitted with the same type, or has yours got the bigger bolt on type with a built in flywheel.?
I will take mine to the Post Office tomorrow and find the cost to post to Belfast.
Regards,
Chris.
Volvo_133 is offline   Reply With Quote
Old Feb 24th, 2019, 17:47   #6
Volvo_133
VOC member
 

Last Online: Yesterday 20:16
Join Date: Jan 2008
Location: Sheffield
Default gearbox output flange.

Hi JP,
On second thoughts I will obtain a price to send to Dublin!!!Sorry.
Chris
Volvo_133 is offline   Reply With Quote
Old Feb 24th, 2019, 21:08   #7
JP 1800
Master Member
 

Last Online: Today 00:15
Join Date: Aug 2009
Location: Dublin
Default

Hi Volvo 133, many thanks for getting back to me, the overdrive unit I have is from an early P1800 and has the type 1 fitting which uses the u shaped bolts to attach the universal joints to the rear of the overdrive, I am looking for the later small circular type that attached to the corresponding flange on the prop shaft. My current output shaft has 8 splines so only an 8 spline type will do, is this the type you have and would it be possible for a picture of the output flange?. on a final note the flange if suitable can be shipped to Belfast as it will be then sent down to my PO box in Dublin as this works out more convenient for me

Thanks again

JP

Last edited by JP 1800; Feb 24th, 2019 at 23:27.
JP 1800 is offline   Reply With Quote
Old Feb 25th, 2019, 19:03   #8
Volvo_133
VOC member
 

Last Online: Yesterday 20:16
Join Date: Jan 2008
Location: Sheffield
Default gearbox output flange.

Hi Jp,
Mine is the small round type, I have had a few m40 and m41 boxes over the years and this flange is the most common. It looks the same as the flange on the rear axle input on my 1970 Amazon 133, with the unequal centres for the 4 bolt holes.I have checked it and found it to have 10 splines. I have a quote for post to Dublin. Let me know if it is of any use.
Regards,
Chris.
Volvo_133 is offline   Reply With Quote
Old Feb 26th, 2019, 21:22   #9
JP 1800
Master Member
 

Last Online: Today 00:15
Join Date: Aug 2009
Location: Dublin
Default

Hi Chris,

Thanks for getting back to me. Unfortunately the 10 spline flange will not fit onto my OD unit, I will have to use the existing flange and use the u shaped bolts.

Many thanks

JP
JP 1800 is offline   Reply With Quote
The Following User Says Thank You to JP 1800 For This Useful Post:
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:55.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.