Best way to drill a hole at drivers door

[fanvol]

Hi all,
I am trying to pass a wire to be connected near drivers door inside car the wire will need to be connected to turning lights/parking lights inside car. I need to drill a hole at the door itself at the car there is a grommet which I can pierce but at the door there is no room even to get there with the drill.
Any tips how I could do this without have to remove the door?

[davebb]

Hi can you please tell use why you need to drill a hole in the door,
Dave

[ripstandem]

Remove door to drill or use an offset chuck

[fanvol]

Originally Posted by davebb

Hi can you please tell use why you need to drill a hole in the door,
Dave

forget about ... decided not to do. Too much of a hassle. thanks

[ma70]

Originally Posted by davebb

Hi can you please tell use why you need to drill a hole in the door,
Dave

My guess, given where it was intended to be wired to, is the addition of marker lamps & turn signal repeaters to the mirror back. (The thought did occur to me when I realised our mirrors have puddle lights in them but I think it'd be a bit "Germanic")