|
Information |
|
V40 Tie Rods seizedViews : 479 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 28th, 2023, 12:03 | #1 |
New Member
Last Online: Mar 20th, 2024 05:57
Join Date: Jun 2021
Location: Sussex, UK
|
V40 Tie Rods seized
I've just been told a garage can't do my tracking as the tie rods are seized solid. I've spent a few enjoyable hours under the car with plusgas, hammers, blowtorch and even tried using a trolley jack to lift the wrench secured to the outer tie rod end whilst the inner is braced against the wishbone.
No joy. Any tricks to get them freed up or are they known to just get seized up? I guess the next step is to just cut them off but I'm hesitant as last time I did a similar job was on a Honda Civic, and I ended up just replacing the outers as I couldn't get the inner tie rods out...however in this situation I might need to cut the inner rod so there is no going back once I've started... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|