|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
Brake fluid questionViews : 814 Replies : 14Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Nov 13th, 2017, 17:29 | #1 |
RobertP
Last Online: Jan 23rd, 2018 12:54
Join Date: Jul 2014
Location: Crewe
|
Brake fluid question
I have had a phase 2 (X-reg) 1.9 diesel V40 for about a year now. Today the brake warning light failed to go out. When I checked, the fluid was just level with a little tube that leads off from the fluid reservoir. The brakes were working as normal. So I took the lid off and topped it up with dot 4 as specified. But inside the lid is a black bulbous thing, made of thin soft plastic. When I put the lid back on, a lot of the brake fluid came pouring out again. There's no mention of this in the Haynes manual. I can remember having this problem some time last year. If the level where the light stays on is 'MIN' where should 'MAX' be? It didn't take a lot of fluid. And what's the big black thing for? (Sorry if this is a common problem that everyone else knows about.)
|
Nov 13th, 2017, 17:48 | #2 |
Member
Last Online: Oct 25th, 2023 03:45
Join Date: Jan 2014
Location: Doylestown
|
Normal, just press the black bit back into the lid, it should collapse and fit into it nicely.
I'd be concerned about where your fluid is going.
__________________
03' S40 89' 740 GLE |
Nov 14th, 2017, 16:08 | #3 |
RobertP
Last Online: Jan 23rd, 2018 12:54
Join Date: Jul 2014
Location: Crewe
|
Thanks for that. I will try pressing it back in. I assumed that the fluid went down as the brake pads wore? Perhaps if I had filled it up properly the first time it would not have been low this time. The first time, I just topped it up as part of regular maintenance, not because it was low.
|
Nov 14th, 2017, 17:13 | #4 |
VOC Member
Last Online: Yesterday 22:32
Join Date: Mar 2008
Location: Northampton
|
The black insert in the cap follows the brake fluid as the level falls and needs pushing back into the cap when refilling with fluid. It is designed to eliminate as much air as possible in the reservoir thus preventing moisture contaminating the fluid. One of the little niceties that Volvo think of.
__________________
2001 V40 2.0lt Sport lux - Daily Driver. 174k miles. 2003 C70 2.4 GT Convertible - Garage Queen. 65k miles. http://www.neptuno6benagil.com |
Nov 14th, 2017, 18:52 | #5 |
Member
Last Online: Apr 20th, 2021 22:33
Join Date: Sep 2015
Location: Blackburn
|
Have you checked the condition of your pads and discs? As when the pads wear the fluid level drops in the reservoir as it's in the pipes because the piston is further out.
__________________
Phase 2 1.9tdi V40 |
Nov 15th, 2017, 05:03 | #6 |
Non Fragile
Last Online: Oct 13th, 2023 05:46
Join Date: Apr 2010
Location: Chadderton, Oldham
|
Yeah, our car has the black bulbous thing, and it is frustrating. I too have had the fluid spill out, exactly as you describe. The only solution I've found is to be aware of it and try to judge the quantity appropriately, and it takes practice, but it's not something you will do very often.
I didn't know about it "following the fluid down", although it sounds plausible. Mine doesn't do this, it simply displaces any fluid in it's way. It's soft enough to squash with finger pressure, but not with fluid during screw-down, it just spills. As said above, if you're needing to top it up - ever - it's because you have a leak. That needs fixing. Get a hose pipe on the area, drench the thing in water, and don't be prudent with it. Brake fluid will destroy the paint on the subframe, which it almost certainly where it ended up, and therefore rust. And the steering rack, and it's pipes and bolts, and bodywork. That ain't cheap to fix. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|