Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > PV, 120 (Amazon), 1800 General

Notices

PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

B20B Webber carb help

Views : 702

Replies : 7

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Oct 16th, 2018, 05:36   #1
lelshaddai
Senior Member
 
lelshaddai's Avatar
 

Last Online: Dec 30th, 2022 03:42
Join Date: Jun 2015
Location: Mesa, Arizona
Default B20B Webber carb help

I am running a 1969 B20B in a 544. It has the Webber conversion.
The engine is really running rough at start up. Choke is killing the engine instead on making idle faster. Dwell is at 62. Timing has been tried from 10 to 16 with little difference in performance. Lash is adjusted correctly. Even when it warms up it shakes a bit. I am left with carb issues. It also is bogging down under acceleration. I think it may be a jetting problem. Carb has been rebuilt. It is a 32/36 manual choke.

Right now idle it is jetted, 60 primary, 50 secondary
Air jets are 150/150
Mains are 175/170

I have used idle jets in this combination 55/55, 50/60, 60/55, 55/60
I have used 145/140 on main jets.

Does anyone use this carb and what jets do you use to make it work well?
__________________
1962 Volvo PV544
1951 Studebaker Starlight State Commander Coupe
1953 Studebaker Starlight Commander
lelshaddai is offline   Reply With Quote
Old Oct 16th, 2018, 11:54   #2
Faust
Master Member
 
Faust's Avatar
 

Last Online: Mar 26th, 2024 19:41
Join Date: Sep 2008
Location: Nottingham
Default

BEFORE you blame running issues on your carb, are you SURE the ignition components are all in good order? Always check, check and check again before faffing around with carbs/injection systems. The 'shaking' at idle you describe sounds like you could be missing a cylinder (as in non-firing). Try new HT leads, plugs, points, condenser, cap and see if that solves the problem.


Got the Weber 32/36 on my B20 - don’t know what size the jets are as it was jetted for a B20 when I bought it as a complete kit from Redline.

Go through the checklist on setting up your carb: http://www.3fowlers.com/Weber%20Trou...ng%20Guide.pdf

Might be worth contacting Weber/Redline and asking their advice about jets. Re-jet kits are cheap and it takes a couple of minutes to change them with the carb on the car, so it’s worth having a go.

Manual chokes can be a pain on these carbs until you get them just right. Take the air cleaner off, get someone to pull the choke out inside your car, watch the activation of the choke mechanism against the throttle assembly: the choke should ‘lift’ the accelerator shaft when engaged (thus allowing the revs to rise at fast idle). You might need to put a sharper bend in the S shaped connecting rod. You can also loosen the screw which holds the choke mech onto the carb, rotate it anti clockwise, re-tighten the screw and try again.

Be aware that you DON’T need full choke on one of these cabs fitted to a B20. I’ve got mine set up so full choke means the 2 choke flaps are on ¾ closed. If you fully close them, your engine will not be happy.

Once you’ve got the hang of setting one of these carbs up you’ll be surprised how good they are.


Mike
Faust is offline   Reply With Quote
Old Oct 16th, 2018, 14:36   #3
Derek UK
VOC Member
 
Derek UK's Avatar
 

Last Online: Today 17:01
Join Date: Jul 2006
Location: Chatham
Default

As said, and it's the same with SU's, the first fraction of the choke pull out should just open the main butterflies a fraction to increase the revs. After that, it should progressively close the choke plates. Many Weber users just rely on giving the pedal a couple of dabs to squirt a little gas into the manifold before turning the key and that is often enough when the weather is warm. You have plenty of that. Just using the first fraction mentioned to increase the idle a bit for a couple of miles should stop it going below the normal idling speed until the oil warms up a bit. Again, this is the same with SU's. On a warm day, I can just hit the starter button without touching the pedal or choke and it will start if has run that day. It might have an idle which is lumpy and about 100 rpm down and that's where the first fraction of choke comes in handy.
Derek UK is offline   Reply With Quote
Old Oct 16th, 2018, 16:41   #4
lelshaddai
Senior Member
 
lelshaddai's Avatar
 

Last Online: Dec 30th, 2022 03:42
Join Date: Jun 2015
Location: Mesa, Arizona
Default

Thanks for all the sound information. I did call Redline. Did not want to give me much information since I did not buy anything from them. I will check the electrical components today and the choke/pump settings.

On another note how easy/difficult is it to replace the valve guides? I replaced the stem seals but still get smoke at shifting under load(going up or down hill)
__________________
1962 Volvo PV544
1951 Studebaker Starlight State Commander Coupe
1953 Studebaker Starlight Commander
lelshaddai is offline   Reply With Quote
Old Oct 16th, 2018, 23:52   #5
saintlyvolvo
Junior Member
 

Last Online: Mar 26th, 2024 14:02
Join Date: Jul 2010
Location: Moss
Default

Your jets are pig rich!

However, the first ting you should have done before installing the Weber is to flip the carb upside down and count how far in you can screw the idle adjustment before you expose the progression holes. If you have exceded this, the carb will be impossible to tune correctly.
__________________
Front wheel drive is for girls

Last edited by saintlyvolvo; Oct 16th, 2018 at 23:58. Reason: Fault
saintlyvolvo is offline   Reply With Quote
Old Oct 16th, 2018, 23:56   #6
lelshaddai
Senior Member
 
lelshaddai's Avatar
 

Last Online: Dec 30th, 2022 03:42
Join Date: Jun 2015
Location: Mesa, Arizona
Default

This car came with the carb already installed. I have just been trying to get it to run better. What jets do you suggest for it? And I’m not sure I understand what you mean by the progressive holes? I can take the carb off and look at it again. But I just need to know and understand what you want me to do.
__________________
1962 Volvo PV544
1951 Studebaker Starlight State Commander Coupe
1953 Studebaker Starlight Commander
lelshaddai is offline   Reply With Quote
Old Oct 17th, 2018, 00:10   #7
saintlyvolvo
Junior Member
 

Last Online: Mar 26th, 2024 14:02
Join Date: Jul 2010
Location: Moss
Default

Take a look at this: https://www.jeepforum.com/forum/f8/w...ssion-1051137/

There are no standard jetting, but common combinations do excist with the B20, like 55/50 idle jets and 150/145 mains.
__________________
Front wheel drive is for girls
saintlyvolvo is offline   Reply With Quote
Old Oct 17th, 2018, 13:42   #8
tdz840
VOC Member
 
tdz840's Avatar
 

Last Online: Dec 14th, 2023 12:57
Join Date: Nov 2004
Location: fareham
Default Weber issues

I cant comment on this particilar weber but the principals are the same for all.
I have a set of Solex ADDHE which are similar to the DCOE which again is similar in principal to your carb.
Everything appears to point to fueling
Assuming the ignition is spot on (use the basic B20 specs is a good startng point). You wont tune any carb if the ignition specs are not correct
Spark plugs - what colour
Idle screw. 1.5 turns out - if more than 2 then idle jet is too lean if less than 1 then too rich. Change out in tranches of ten
Idle jet - typically should correlate to the choke size i dont have the calc to hand
Main jet - again correlates to the choke size change in tranches of 5
Air Corrector- minimal effect below 3500 as most of the air is coming via the emulsion and idles (idle jet is a mixture of fuel and air)
Finally emulsifier - these are rarely changed and if the car has been running right on this engine i would suggest to leave well alone. If it has never run right then you need to check that. I may have some baseline specs somewhere
One point re the progression holes.
If they are uncovered with the throttle plates on the stops then you are masking the problem. In effect you are adding fuel when it shouldnt be added. The ‘system’ should be soley on idles up to 1500. If the progressions are uncovered below that then its supplementing the idles. The progressions only fill the ‘hole’ between idles and mains.
Russ

Last edited by tdz840; Oct 17th, 2018 at 13:45. Reason: Cant spell or type
tdz840 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 20:12.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.