|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Pipes/hosesViews : 424 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 11th, 2019, 18:52 | #1 |
Junior Member
Last Online: Jun 21st, 2023 17:45
Join Date: Dec 2011
Location: northwich
|
Pipes/hoses
Could anyone tell me the correct sizes for
A the hose from the vac pump to the boost solenoid B the hose from the solenoid to the actuator I have 26hg at the T piece with my thumb over one hole but when i re attach the pipe from the T to the solenoid i have a fluctuating needle on the gauge. I'm guessing that 26hg is decent at the T and i have a leak after it. Can i buy these pipes genuine from volvo and does anyone know the part number ?
__________________
2003 Volvo v70 d5 manual |
Aug 12th, 2019, 20:23 | #2 |
Premier Member
Last Online: Yesterday 09:50
Join Date: Aug 2008
Location: Newcastle
|
See my post 13 here:-
https://www.volvoforums.org.uk/showt...=297275&page=2 Assuming you are claiming 26inch mercury as your pressure. If so this is either too low, as you might be including " 1 atmosphere" in your reading ( depending upon how you achieved your reading in the first place.) Or Way to high as I understand the Volvo 2.5T engine is a light pressure turbo and then that figure would be way too high. I can't tell you what your figures are, but my high pressure turbo R would not give those readings. - if I have understood the last couple of days testing and running boost checks. Can't help on the other stuff, except to say 90% sure Volvo dealers will be able to supply the required pipe work. Cheers Bob |
The Following User Says Thank You to 100K+ For This Useful Post: |
Aug 12th, 2019, 20:41 | #3 | |
Junior Member
Last Online: Jun 21st, 2023 17:45
Join Date: Dec 2011
Location: northwich
|
Y
Quote:
D5 btw
__________________
2003 Volvo v70 d5 manual |
|
Aug 12th, 2019, 20:53 | #4 | |
Premier Member
Last Online: Yesterday 09:50
Join Date: Aug 2008
Location: Newcastle
|
Quote:
Now see its diesel, so sorry can't help. Cheers Bob |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|