|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
740 Rear wheel arch plastic coverViews : 436 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 30th, 2019, 22:29 | #1 |
Member
|
740 Rear wheel arch plastic cover
Hello
I am having a small amount of corrosion repaired, on the inside of the rear arch. I have removed the 2 10mm bolts/screws, but cant remove the liner as it appears to be fixed elsewhere what else holds it in. Thanks |
The Following User Says Thank You to panda529e699 For This Useful Post: |
Oct 21st, 2019, 11:54 | #2 |
VOC Member
Last Online: Apr 15th, 2024 13:33
Join Date: Oct 2004
Location: Harrow
|
Not been on forum recently, so you may have resolved the issue of removing the wheel arch guard.
My copy of parts list indicates there are 3 bolts per arch. As it is sometime since I removed one can't remember exactly where. But think two into main part of wheel arch, and third likely to be thriugh mud flap, or where a flap would be. It is quite tough to get out, as it is a tight fit into the lip of the wheel arch. Also, if not been out before could well be stuck to underseal; it will need a good tug to get it out Good Luck |
The Following 2 Users Say Thank You to penninepullman For This Useful Post: |
Oct 21st, 2019, 16:56 | #3 |
Member
|
740 Rear wheel arch plastic cover
Thanks for the reply, I left it to the body shop to do, but will follow your advice on the other side, then I can check all is ok.
|
The Following User Says Thank You to panda529e699 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|