|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Replace dipped bulbViews : 538 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 21st, 2019, 11:16 | #1 |
Junior Member
Last Online: Mar 23rd, 2024 18:39
Join Date: Feb 2012
Location: Heswall
|
Replace dipped bulb
V70 D5 dipped bulb blown headlight out easy now to replace bulb now senior moment looked at manual says detach bulb by pressing holder downwards does not move any help
|
Oct 21st, 2019, 11:41 | #2 |
Member
Last Online: Jun 23rd, 2022 10:44
Join Date: Jun 2018
Location: Hemel Hempstead
|
Dipped bulb.
Hi,
If it's anything like the bulbs on my C70, the holder may be the two strands of metal running across the bulb to hold it in place. This needs to be depressed slightly to unhook it, once free the bulb should simply pull out. Fred |
Oct 21st, 2019, 19:08 | #3 |
Junior Member
Last Online: Mar 23rd, 2024 18:39
Join Date: Feb 2012
Location: Heswall
|
Replace dip bulb
No it’s not like that it’s a round ring with like a couple of metal bits at 45 degrees sticking up might have to go to my dealers to get the answer
|
Oct 22nd, 2019, 07:40 | #4 | |
Senior Member
Last Online: Jan 2nd, 2024 21:24
Join Date: Aug 2014
Location: Kingston
|
Quote:
Once out, it should be easier to replace the bulb. |
|
Oct 22nd, 2019, 09:59 | #5 |
Junior Member
Last Online: Mar 23rd, 2024 18:39
Join Date: Feb 2012
Location: Heswall
|
Replace dipped bulb
Scooter had light unit out does the bulb pull out or twist out right or left as it is reluctant to move previous V60 was just pull bulb up nice and easy manual says push down on outer ring that holds bulb there must be someone out there that has changed a bulb on a V70 2014 model
|
Oct 22nd, 2019, 10:11 | #6 |
Premier Member
Last Online: Feb 11th, 2023 20:32
Join Date: May 2010
Location: Blyth, Northumberland
|
Do those “metal bits” have a small turned over end and is each one secured under a small hooked part of the bulb holder ? If so they are springs which hold the bulb in. They can be unhooked and swivelled away from the bulb so permitting it’s removal.
__________________
Ian. Since 2005: 1992 Volvo 940 estate 2.0L. Manual. Daily driver and workhorse. |
Oct 22nd, 2019, 19:10 | #7 |
Junior Member
Last Online: Mar 23rd, 2024 18:39
Join Date: Feb 2012
Location: Heswall
|
Replace dipped bulb
So do you push down on the ring to get the bulb out and how do you attach the springs after you have the bulb out not simple but when you have done one it will be easy
|
Oct 22nd, 2019, 19:41 | #8 |
Premier Member
Last Online: Apr 11th, 2024 09:21
Join Date: Nov 2012
Location: Ffos y Ffin
|
On my 2009 xc they just pull out and push in. However I have found it nessesary to have the headlights re aligned every time I have removed a bulb as they never go back in in the same position.
If your 2014 has positive locating bulbs I will look at changing mine if possible as the spring mounts I have are a pain in the bum and costly having to get alignment adjusted every time. Paul. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|