|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Dog dish install gone wrong. No startingViews : 1614 Replies : 14Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Feb 16th, 2019, 09:47 | #1 |
Senior Member
Last Online: Mar 1st, 2024 08:41
Join Date: Mar 2009
Location: London
|
Dog dish install gone wrong. No starting
Hi all,
My 97 940 2.3 turbo is getting a dog dish put on. It's on but does not start the engine. I'm sure I have the correct fly wheel but do not know whats wrong. The garage doing it has had it off twice now. How does the timing setup? Help! Cheers Martin |
Feb 16th, 2019, 09:51 | #2 |
Senior Member
Last Online: Mar 1st, 2024 08:41
Join Date: Mar 2009
Location: London
|
Pictures
|
Feb 16th, 2019, 10:11 | #3 |
Premier Member
Last Online: Feb 11th, 2023 20:32
Join Date: May 2010
Location: Blyth, Northumberland
|
I don’t know very much about this but my first thought would be, does the engine have a crank position sensor (rpm sensor) and does it receive it’s signal from the fly wheel and is it working?
|
Feb 16th, 2019, 10:20 | #4 |
Senior Member
Last Online: Mar 1st, 2024 08:41
Join Date: Mar 2009
Location: London
|
Yes it was working before. I asked on FB group. It looks like the flywheel is not in the correct place. It can have 8 different place to be bolted down.
|
The Following User Says Thank You to mhuk For This Useful Post: |
Feb 16th, 2019, 11:08 | #5 |
Premier Member
Last Online: Feb 11th, 2023 20:32
Join Date: May 2010
Location: Blyth, Northumberland
|
So if the flywheel is not in the correct position then the CPS signal is being generated at the wrong time and is confusing the ECU.
There are others on this forum with much more knowledge than me who may know how to determine which position to mount the flywheel. |
The Following User Says Thank You to Ian21401 For This Useful Post: |
Feb 16th, 2019, 12:07 | #6 |
Premier Member
Last Online: Apr 9th, 2024 21:44
Join Date: Jul 2009
Location: Holywood
|
It should fire at some point.
Is the rpm needle flickering a little after about 1-2s of cranking. What is the dog dish from? It needs to have the correct EZK pattern. For example 1 from a 360 with a renix pattern won't work. |
The Following User Says Thank You to TonyS9 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|