|
Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines. |
![]() |
|
Engine oil level has increasedViews : 1478 Replies : 6Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Oct 11th, 2023 16:07
Join Date: Oct 2023
Location: Wirral
|
![]()
My v50 diesel engine oil level has increased without adding further oil have changed the oil and filter. After 3 days just checked the oil level and it has increased anyone experienced this problem
|
![]() |
![]() |
![]() |
#2 |
Master Member
Last Online: Apr 8th, 2024 06:51
Join Date: Dec 2021
Location: Gloucester
|
![]()
I've experienced this with our Skoda Yeti, but not on our V70 D5. The usual suspects are (i) water/coolant getting in courtesy of a blown cylinder-head gasket, or (ii) diesel fuel contamination as a result of repeated attempts of the DPF regeneration process that have failed. I guess you may have checked your coolant level to see if it has gone down or if there is any sign of oil in the coolant.
__________________
V70 D5 SE Lux MY 2008 |
![]() |
![]() |
![]() |
#3 |
New Member
Last Online: Oct 11th, 2023 16:07
Join Date: Oct 2023
Location: Wirral
|
![]()
Thanks for the reply doesn't seem to be the cylinder head maybe the dpf filter how will I resolve the issue?
|
![]() |
![]() |
![]() |
#4 |
Master Member
Last Online: Apr 8th, 2024 06:51
Join Date: Dec 2021
Location: Gloucester
|
![]()
I've done my share of fretting about DPF blockages, increased oil levels and failure of the regeneration process over the last 15 years I've been running diesels. On a previous BMW there were a number of different conditions that had to be satisfied for a regeneration to take place. The Yeti is probably the same, but it gives definite clues when a regen is required and/or taking place (raised tick over, fans running, and it can be tracked via a mobile phone app).
Correspondents on here say that the Volvo regeneration process is very robust, and rarely causes problems. I used the Car Scanner app last week to monitor the DPF temperatures on our V70 in the hope of catching a regen taking place. No such luck because the app showed a temperature of 0°C - an unlikely reading at 60-70mph on the M5. Maybe the DPF temperature sensor on my DPF is up the Swanee. Sorry I've not been much help, but if you have a search elsewhere on the forum you may find someone who can suggest the best way to diagnose your specific problem - possibly using VIDA.
__________________
V70 D5 SE Lux MY 2008 |
![]() |
![]() |
![]() |
#5 | |
Junior Member
Last Online: Yesterday 10:56
Join Date: Aug 2021
Location: Lytham
|
![]() Quote:
Funnily enough I have had a similar problem this morning, A message came on the screen saying "engine oil overfilled" Service needed. I spoke to my local Volvo dealer and apparently Volvo has issued advice to dealers not to completely fill the engine oil to capacity at service to allow for expansion. Apparently the cure for this problem is to remove some of the oil. I have arranged an appointment with my local Volvo dealer who offer this service free of charge. I will in the meantime give the car a good run down the motorway to see if it clears the problem. It would appear the main problem are short journeys that hinder the action of the particulate filter.
__________________
Volvo XC60 B5 MHEV Inscription Pro Denim Blue MY21 Last edited by rmvm; Oct 12th, 2023 at 09:48. |
|
![]() |
![]() |
![]() |
#6 |
New Member
Last Online: Jan 19th, 2024 07:50
Join Date: Jul 2021
Location: Milton Keynes
|
![]()
I also have the common problem of an ‘oil overfill’ warning coming up on my XC60 D5 (2019). I understand that this is probably caused by a stalled regeneration cycle allowing extra fuel to be dumped into the oil sump. The cure is an oil change but I have also bought a OBDLINK MX+ and I’m using the Car Scanner app as I wanted to be able to see the building soot levels in the DPF so that I could know when a regen cycle was due. I was hoping to see a ‘soot level’ indicator output, but I don’t think the XC60 of my year has an output sensor for the OBD to read. I believe that instead, the differential pressure across the DPF is used to indicate the reduction in exhaust flow that arises from a soot build up in the DPF. The Car Scanner software can read the DPF differential pressure OK, but I have no idea what that differential pressure should reach when indicating a blocked filter that would itself trigger a regeneration cycle. Does anyone know what that pressure is?
|
![]() |
![]() |
![]() |
#7 |
Premier Member
Last Online: Apr 27th, 2024 15:51
Join Date: Oct 2011
Location: Groningen
|
![]()
The pressure is dynamic according to the engineload, but vida will mention the pressure for idle i guess
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|