123Gt Relay Plinths

[red122]

Hi
I have a couple of relay plinths but they are of different lengths .
Does anyone know which is the correct length to use on the GT and exactly where it should be mounted on a RHD car ? Ive had new inner wings fitted and the plinths are in a box of spares and I don't know which one to use ?

[Ron Kwas]

R122;

Perhaps a picture showing differences would clarify your question...maybe this picture of the Elec panel on a RHD 123GT helps:

Source: http://www.sw-em.com/123GT_Reliabili...mprovement.htm
Cheers

[nozamaman]

Originally Posted by red122

Hi
I have a couple of relay plinths but they are of different lengths .
Does anyone know which is the correct length to use on the GT and exactly where it should be mounted on a RHD car ? Ive had new inner wings fitted and the plinths are in a box of spares and I don't know which one to use ?

They are fitted to the nearside inner wing, I will try and find a photo of the plinth installed on a 123gt and get back to you.

[red122]

Originally Posted by Ron Kwas

R122;

Perhaps a picture showing differences would clarify your question...maybe this picture of the Elec panel on a RHD 123GT helps:

Source: http://www.sw-em.com/123GT_Reliabili...mprovement.htm
Cheers

Thanks Ron
The panel I have looks thinner in depth about 1 inch high

[Derek UK]

"The panel I have looks thinner in depth about 1 inch high"

Rear number plate mount?

[Liljerum]

The size of the plinth is the one posted in Rons picture.
Here is another picture for location.

[123gt]

Total Length 467mm (including base where bolts attach)
Height 62mm
Width 15mm
Position is 70mm from the front of relay panel base near where the retaining bolts attach to body to the closest point on the metal slot that houses the front rubber weatherstrip. The top of the panel is level with the front guard lip that attaches to the body. I've tried to be explicit as possible. This is the factory position on my RHD 67 123GT.