Boot pockets?

[bornmiddleaged]

Quick update - these have arrived (suprisingly quickly) and I've put them on, as per the pictures that have hopefully attached properly.
Added the staples as they were a bit gappy along the bottom and also to stop the velcro unsticking.
For £6odd I'm happy with that and can buy pretty much a whole tank of fuel with the saving vs. the OEM parts.

[Raddish]

Hi
Finally parts arrived from Volvo. Due to covid, Christmas, new year and now me isolating my local dealer Marshals Nottingham dropped off my boot new for my V90CC. Does anyone know how to fit, especially the clips? Is it simple?

D000D447-3D4B-4B4E-8787-E95BEB616551.jpg

E86F3137-B239-4E1A-A020-F42C9E42713E.jpg

FE55FB34-72B2-458E-B81A-6F2FD62B34CF.jpg

[bornmiddleaged]

Originally Posted by Raddish

Hi
Finally parts arrived from Volvo. Due to covid, Christmas, new year and now me isolating my local dealer Marshals Nottingham dropped off my boot new for my V90CC. Does anyone know how to fit, especially the clips? Is it simple?

Attachment 132501

Attachment 132502

Attachment 132503

That is rather a puzzle... Presumably no instructions? My guess would be that the wedge shaped bit would be inserted into a hole in the car somewhere and rotated 90deg to keep it locked in. Then the metal rod that supports the netting would be clipped into the C shaped side (like a claw), which holds it in place.
Do you any have holes like that in the boot? I have a V60 rather than V90, but I don't think I have any holes like that.

I've had a look back at the original schematic
here. It's quite low resolution and when you zoom in, the image gets really blurry, however, if you look at part 28, there is a dotted line coming out of the bottom that goes to what appears to be a waiting hole.
That would the right hand side of the boot but the part you have pictured looks more like part 33, for the LHS and the schematic doesn't show that side. That's where I'd start looking though.

[Raddish]

There’s no pre done holes in parts 2 or 3. I’ve got parts 32+33.

[bornmiddleaged]

Originally Posted by Raddish

There’s no pre done holes in parts 2 or 3. I’ve got parts 32+33.

Hmm... curious. Maybe drill a small hole in the carpet to take the wedge shaped piece?

[Raddish]

That’s what I was thinking. Rang dealer back, he said because they sent classes as accessories, there’s no fitting instructions. Going to try a small hole and see how it goes.

[Raddish]

Got round to fitting the boot pocket today.
Using the clips provided and a spare piece of 4mm thick bolser timber from
Child’s Christmas Model. I started small and got bigger until I found. 10mm wood drill made the right size hole for the clips.
Then removed boot battery cover.
Used a blue and masking tape to mark where I’d fit holes. Masking tape won’t stick to the carpet.
Then 5 10mm holes into the battery cover. Removed tape.
Fitted clips, it’s difficult you really have to push them through.
Fitted pocket then fitted to car. Have to say I’m impressed.
ACFB42A0-B948-48E0-90CB-996E64EEC6E0.jpg
6D801F07-C7EC-4F37-A09E-AD77E698D32F.jpg
0347A549-A4F3-4028-A94B-ADE1609CF081.jpg
Keeps the shopping bags from sliding around

[crashbarrier]

Hi Raddish,

The net looks good and thanks for the installation photos. Looking back it seemed from your earlier post that you were going to order from the US, Autobarn Il, but said that your local UK dealer delivered it to you which suggests that it was ordered here.
Can you confirm where you ordered it from, the part numbers if you have them and the final cost?

Many thanks

[Raddish]

Was going to order from US, but they wanted as much for postage as parts.
Part numbers - clips (x6) 32204236 and pocket (x1) 32204064. Ordered from local Volvo dealer and they even delivered to me because I’m isolating. Cost was £46.08 all in. So same prices in £ as $.

[crashbarrier]

Thanks, Raddish, that's all I need so I'll give Doves Horsham a call and order over the phone.