|
Information |
|
Incandescent Dash BulbsViews : 11688 Replies : 64Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Oct 27th, 2014, 00:22 | #1 |
I do like a V40
Last Online: Dec 1st, 2018 19:03
Join Date: Oct 2013
Location: North Surrey
|
Incandescent Dash Bulbs
I bought a job lot so have dash bulbs available for sale. All are in lots of three bulbs and cost £1. Postage for any amount is £1 (so order as many as you like and the postage remains the same).
4.7mm bulbs, suitable for Phase 2 headlight cluster (note: bulb replacement requires soldering) . 4.0mm bulbs, suitable for Phase 2 heater panel (no soldering required, the contacts pull out with pliers and bulb can then be slid into place) . 3.0mm bulbs, suitable for Info Centre switch and other smaller switches like the alarm cancel, etc (bulb wires fold into the holders with these) . I will check the Phase 1 holder size suitability and update in due course, but I have included the full dimensions so you can check for yourself if you need to. If you would like to buy, let me know by PM (if you can't PM yet, post up here and I'll send you my email address). I can take payment via Paypal, each lot of three bulbs costs £1, postage is fixed at £1 whether you buy one lot or ten lots. I can provide instructions if you need them and I'm also thinking of knocking up a quick website to make the ordering process easier so watch this space. P.S. I have found somewhere that sells the blue silicone bulb caps but the 4.7mm ones are $9 for 10(!) + postage from the US so am trying to find a bulk supplier for those at the moment. The smaller ones that I can find are too dark a shade of blue so am going to experiment with colouring the bulbs, will let you know. You will need to keep your current holders and replace the bulbs in those, this is an easy task for most of the bulbs but for the Phase 2 headlight cluster you will need to get your soldering iron out. I'm also trying to track down a supplier for those holders so hopefully the soldering can be avoided, and any burnt holders can be replaced.
__________________
Current: '02 V40 1.9TD, '02 V40 T4 Previous: '00 V40 1.9TD, '99 V40 1.9TD, '97 V40 2.0CDi, '87 240DL Last edited by v40alex; Oct 27th, 2014 at 00:54. |
The Following 14 Users Say Thank You to v40alex For This Useful Post: |
Oct 27th, 2014, 02:48 | #2 |
I've Been Banned
Last Online: Mar 4th, 2023 12:36
Join Date: Aug 2013
Location: paignton
|
I need to send mine up to you Alex I've got them all out
|
Oct 27th, 2014, 10:24 | #3 |
I do like a V40
Last Online: Dec 1st, 2018 19:03
Join Date: Oct 2013
Location: North Surrey
|
I've PM'd you
__________________
Current: '02 V40 1.9TD, '02 V40 T4 Previous: '00 V40 1.9TD, '99 V40 1.9TD, '97 V40 2.0CDi, '87 240DL |
Oct 27th, 2014, 16:50 | #4 |
Junior Member
Last Online: Sep 26th, 2023 19:59
Join Date: Aug 2014
Location: Leyland
|
will start texting friends tonight to see who has a soldering iron.
__________________
Víđarr (Vidar), 53 P2 Volvo S40 1.6. |
Nov 6th, 2014, 18:06 | #5 |
V40 Owner
Last Online: Dec 13th, 2020 01:28
Join Date: Aug 2006
Location: Tonyrefail, Souh Wales.
|
PM sent!
|
Nov 6th, 2014, 18:52 | #6 |
Always listen & learn!
Last Online: Mar 13th, 2023 19:32
Join Date: Dec 2013
Location: Winchester + Malaga
|
Could do with some of them Alex.
__________________
264 V8 5.0L V40 BiFuel, she's gone, she's dead......Oh well! |
Feb 9th, 2015, 21:59 | #7 |
New Member
Last Online: Dec 9th, 2020 13:39
Join Date: Jan 2015
Location: belfast
|
Can I order some dash bulbs please v40alex (can't pm)
|
Feb 9th, 2015, 22:02 | #8 |
I do like a V40
Last Online: Dec 1st, 2018 19:03
Join Date: Oct 2013
Location: North Surrey
|
Of course, I'll PM you my email address.
__________________
Current: '02 V40 1.9TD, '02 V40 T4 Previous: '00 V40 1.9TD, '99 V40 1.9TD, '97 V40 2.0CDi, '87 240DL |
Feb 9th, 2015, 22:10 | #9 |
New Member
Last Online: Dec 9th, 2020 13:39
Join Date: Jan 2015
Location: belfast
|
Thank you
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|