|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Electric window goes downViews : 333 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 15th, 2019, 21:03 | #1 |
Junior Member
Last Online: Dec 20th, 2019 10:23
Join Date: Dec 2018
Location: Baldock
|
Electric window goes down
Hi guys, when I put my passenger window up it gets to almost the top and then goes back down, like when something is trapped, nothing obvious stuck in the rubbers or anything.
Is or has this been a common problem in the past? Is this a VIDA adjustment thing or a new module?
__________________
2008 XC90 SE Lux 2.4 1995 Nissan Skyline GTR 620bhp |
Mar 15th, 2019, 21:27 | #2 |
Master Member
Last Online: Today 19:12
Join Date: Sep 2017
Location: Norfolk
|
It most likely just needs re-calibration (it measures closing force via current draw, in case something, or someone, were to become trapped in it).
Keep your finger on the switch as the window is rising and when it reaches the top, continue to hold for 5 seconds.
__________________
2007 XC90 V8 Sport |
The Following User Says Thank You to Moose Test For This Useful Post: |
Mar 16th, 2019, 14:38 | #3 |
GoldMember
Last Online: Apr 20th, 2024 20:28
Join Date: Jul 2010
Location: Kent, UK
|
Solution
Hi Barney,
The solution is here in this thread somewhere,, https://www.volvoforums.org.uk/showthread.php?t=159949 Basically they door module goes into a fault mode when it encounters a large enough resitance/motor current as you close the window, often if your going over bumpy ground or similar, or the mechanism is needing some lube. One of the non vida methods might work for you, just follow them very specifically to see if you can get it to reset, failing that a recalibration on vida will get it working properly in most cases.. post back if you find a fix.. |
The Following User Says Thank You to Thassos For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|