parts for a 1964 p1800

markymar93 · Nov 5th, 2013, 00:13

Hi. does anyone have any parts in reasonable condition for a 1964 1800. I have a fair few parts but looking for items such as seals, head light surrounds, tail lights, hoses etc. Anything will be considered. Thanks mark

P1800Ray · Nov 5th, 2013, 12:59

Mark,
I have loads of bits and pieces if you fancy a trip up to Ascot to have a look.
Cheers
Ray

markymar93 · Nov 6th, 2013, 23:46

Hi Ray

that would be amazing. Next weekend I am getting a little list of bits I need. If okay I will message you then to pop down and see you if that is okay.
thanks mark

P1800Ray · Nov 9th, 2013, 16:02

Sounds a good idea.

markymar93 · Nov 19th, 2013, 19:54

I have asked a couple of people to see if they have some bits to help me. However, please see below the list to see if you have any bits.

Dashboard switches

Chrome trims to front wings

Ignition barrel and coil

anti roll bar link and bushes

front brake hoses

front brake back plates

track control arm rubbers

brake disc service kit

webber throttle linkage

any rubber seals (apart from front and rear windscreen)

Obviously any ruddspeed parts

Separate from this, do you know anyone who refurbishes the dials?

Finally I am looking for all seat covers.

P1800Ray · Nov 20th, 2013, 12:47

Hi Mark,
To cover the things I probably can comment on:

Dashboard switches - Don't have any

Chrome trims to front wings - no but I have the chrome trims for the doors

Ignition barrel and coil - I'm pretty sure that I have the coil (if it has an armoured cable)

anti roll bar link and bushes - don't know

front brake hoses - No sure but can't you get new ones ?

front brake back plates - don't think so

track control arm rubbers - don't know

brake disc service kit - no

webber throttle linkage - yes but I will not sell without the Weber carbs

any rubber seals (apart from front and rear windscreen) - don't think so but I do have all the chrome window seals

I have found a quartz movement (battery operated) that fits into the clock case. I'm doing another one so I may have a spare sometime soon if you are interested.

My interior refit starts (hopefully !) in December and I will have 2 good black vinyl Jensen style seats available once completed. I suspect aftermarket covers have been used so to get them looking correct, they would benefit from a retrim (but are perfectly useable as they are).

Hope this helps !

b20e · Nov 20th, 2013, 20:27

Got a bunch of trim rings for the lights.
I am based in Wokingham but can post these.

markymar93 · Nov 21st, 2013, 13:31

Hi Ray

How much do you want for the chrome surrounds to the windscreens?

thanks

123GT-AMAZON · Nov 21st, 2013, 15:14

Quote:

Originally Posted by P1800Ray

webber throttle linkage - yes but I will not sell without the Weber carbs
!

how much would you be asking for those ? i may well be intrested cheers

regards

robert

P1800Ray · Nov 22nd, 2013, 12:59

Markymar93 and 1800necwinner - I have PM'd you.
Cheers
Ray

Nov 5th, 2013, 00:13	#1
markymar93 Senior Member Last Online: Mar 14th, 2024 08:49 Join Date: Sep 2011 Location: worthing	parts for a 1964 p1800 Hi. does anyone have any parts in reasonable condition for a 1964 1800. I have a fair few parts but looking for items such as seals, head light surrounds, tail lights, hoses etc. Anything will be considered. Thanks mark

Nov 9th, 2013, 16:02	#4
P1800Ray Member Last Online: Apr 17th, 2024 08:28 Join Date: Jun 2013 Location: Berkshire	Sounds a good idea. Last edited by P1800Ray; Nov 9th, 2013 at 16:08.

Nov 5th, 2013, 12:59	#2
P1800Ray Member Last Online: Apr 17th, 2024 08:28 Join Date: Jun 2013 Location: Berkshire	Mark, I have loads of bits and pieces if you fancy a trip up to Ascot to have a look. Cheers Ray

Nov 6th, 2013, 23:46	#3
markymar93 Senior Member Last Online: Mar 14th, 2024 08:49 Join Date: Sep 2011 Location: worthing	Hi Ray that would be amazing. Next weekend I am getting a little list of bits I need. If okay I will message you then to pop down and see you if that is okay. thanks mark

Nov 19th, 2013, 19:54	#5
markymar93 Senior Member Last Online: Mar 14th, 2024 08:49 Join Date: Sep 2011 Location: worthing	I have asked a couple of people to see if they have some bits to help me. However, please see below the list to see if you have any bits. Dashboard switches Chrome trims to front wings Ignition barrel and coil anti roll bar link and bushes front brake hoses front brake back plates track control arm rubbers brake disc service kit webber throttle linkage any rubber seals (apart from front and rear windscreen) Obviously any ruddspeed parts Separate from this, do you know anyone who refurbishes the dials? Finally I am looking for all seat covers.

Nov 20th, 2013, 12:47	#6
P1800Ray Member Last Online: Apr 17th, 2024 08:28 Join Date: Jun 2013 Location: Berkshire	Hi Mark, To cover the things I probably can comment on: Dashboard switches - Don't have any Chrome trims to front wings - no but I have the chrome trims for the doors Ignition barrel and coil - I'm pretty sure that I have the coil (if it has an armoured cable) anti roll bar link and bushes - don't know front brake hoses - No sure but can't you get new ones ? front brake back plates - don't think so track control arm rubbers - don't know brake disc service kit - no webber throttle linkage - yes but I will not sell without the Weber carbs any rubber seals (apart from front and rear windscreen) - don't think so but I do have all the chrome window seals I have found a quartz movement (battery operated) that fits into the clock case. I'm doing another one so I may have a spare sometime soon if you are interested. My interior refit starts (hopefully !) in December and I will have 2 good black vinyl Jensen style seats available once completed. I suspect aftermarket covers have been used so to get them looking correct, they would benefit from a retrim (but are perfectly useable as they are). Hope this helps !

Nov 20th, 2013, 20:27	#7
b20e Simon Good Last Online: Aug 21st, 2019 07:05 Join Date: Apr 2007 Location: Reading View Photos By: b20e	Got a bunch of trim rings for the lights. I am based in Wokingham but can post these.

Nov 21st, 2013, 13:31	#8
markymar93 Senior Member Last Online: Mar 14th, 2024 08:49 Join Date: Sep 2011 Location: worthing	Hi Ray How much do you want for the chrome surrounds to the windscreens? thanks

Nov 22nd, 2013, 12:59	#10
P1800Ray Member Last Online: Apr 17th, 2024 08:28 Join Date: Jun 2013 Location: Berkshire	Markymar93 and 1800necwinner - I have PM'd you. Cheers Ray

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)