Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General
Register Members CarsBlogs Help Calendar Mark Forums Read

Notices

S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 models

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Ecm-a02b

Views : 73

Replies : 1

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Jul 13th, 2018, 21:13   #1
jeremycolley
Member
 

Last Online: Yesterday 09:47
Join Date: May 2007
Location: Norwich
Default Ecm-a02b

2005 XC70 AWDSE LUX 167k miles

I have VIDA / Dice, firstly I'd like to thank CheshireD5 (Si Robb) for his excellent service and instructions for installing the software. Buy your kit from him and follow the video on youtube to install it and you'll be fine.

So - I have the Brake Failure stop safely message, ABS light and red ! light.

Codes now read and I have ECM-A02B which Vida suggests is either 'open circuit on the CAN wiring' or 'Defective ABS Control Module'. Having read up on this forum my gut feel is that the ABS (BCM) is faulty and needs repair or replacement. Is this a good place to start investigations, or is there anything else I should check first?

The message came on and went off for a few days and is now on all the time, which suggests some sort of deterioration or intermittent connection - hence my gut feel that it could be dry solder joints in the ABS module.

Thanks in advance

Jeremy
__________________
2005 XC70 AWD D5 SE LUX (163) 152K

Previous Volvo's, 1996 855 T5 CD Aubergine 855 N/A CD, 940 Wentworth, 760 Estate,740 Estate, 240 DL Estate,240 GLT Estate
jeremycolley is offline   Reply With Quote
Old Jul 14th, 2018, 07:11   #2
petey
Senior Member
 

Last Online: Yesterday 21:36
Join Date: May 2009
Location: Chippenham
Default

I’ve both cut my ABS module open and resoldered the joints (which worked for two years) and then stripped and re-brushed the pump. My suspicion is that the pump was the fault all along, but by reducing the voltage drop across the connections from the pump to the module, I squeaked 20 month’s more time out of it.

VIDA has an ABS process in it, and from memory it ends up with the pump being forced on and you check to see if it actually runs. Mine didn’t, so I took the magnet housing off the pump and found more black dust than on the floor of a black dust factory.
Volvo, BMW, VW group and many more all use the same ATE pump and module. Volvo seem to feel that mounting the rotor in a single bearing at the bottom and a bush at the top is good enough; it isn’t, it leads to a lot of rotor excursion which destroys the brushes. I happened to have a Touareg ABS pump hanging about, so I replaced the brushes on my pump, and fitted the rotor with new bearings and magnet housing from the VW onto mine, and everything’s sorted now.
petey is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:11.


Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.