Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > 200 Series General

Notices

200 Series General Forum for the Volvo 240 and 260 cars

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Headlight Corrosion - can it be reduced or prevented?

Views : 2744

Replies : 52

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Aug 25th, 2017, 21:32   #1
Stephen Edwin
Premier Member
 

Last Online: Oct 26th, 2023 21:42
Join Date: Jun 2010
Location: Thurrock
Default Headlight Corrosion - can it be reduced or prevented?

What causes headlight reflector corrosion and decline? I'm guessing the obvious likely cause. Moisture ingress through the joint between the lens and the reflector?

Has anyone tried applying a sealing tape around the circumference of that joint? To delay or stop the decay of reflectors. Would anyone encourage or discourage that idea and any particular sealing tape?

And are there any recommendations for good reflectors at a sensible/good price please?
Stephen Edwin is offline   Reply With Quote
Old Aug 25th, 2017, 22:07   #2
Clan
Experienced Member
 
Clan's Avatar
 

Last Online: Yesterday 22:26
Join Date: Jun 2007
Location: L/H side
Default

Quote:
Originally Posted by Stephen Edwin View Post
What causes headlight reflector corrosion and decline? I'm guessing the obvious likely cause. Moisture ingress through the joint between the lens and the reflector?

Has anyone tried applying a sealing tape around the circumference of that joint? To delay or stop the decay of reflectors. Would anyone encourage or discourage that idea and any particular sealing tape?

And are there any recommendations for good reflectors at a sensible/good price please?
there is a 100% bond between glass and reflector , there are vent holes on the back which allow air in and out every time the lights heat up and cool down which carries dirt particles in .
__________________
My comments are only based on my opinions and vast experience .
Clan is offline   Reply With Quote
Old Aug 25th, 2017, 23:01   #3
Stephen Edwin
Premier Member
 

Last Online: Oct 26th, 2023 21:42
Join Date: Jun 2010
Location: Thurrock
Default

Thanks Clan.

Now, rhetorical, how do I stop the lights heating and cooling....

.
Stephen Edwin is offline   Reply With Quote
Old Aug 25th, 2017, 23:49   #4
Clan
Experienced Member
 
Clan's Avatar
 

Last Online: Yesterday 22:26
Join Date: Jun 2007
Location: L/H side
Default

Quote:
Originally Posted by Stephen Edwin View Post
Thanks Clan.

Now, rhetorical, how do I stop the lights heating and cooling....

.
The rear covers on later models from 1999 have a gortex material over the vent in the cap which allows water out but not in .
__________________
My comments are only based on my opinions and vast experience .
Clan is offline   Reply With Quote
The Following User Says Thank You to Clan For This Useful Post:
Old Aug 26th, 2017, 03:09   #5
DW42
Senior Member
 

Last Online: Oct 9th, 2022 05:41
Join Date: Feb 2011
Location: Currumbin, Queensland
Default

I don't know how well the new aftermarket headlight reflectors hold up. When looking for used reflectors, the earlier ones seem to be less prone to corrosion than the later ones. The reflectors on my 1990 were very corroded, and I replaced them with reflectors off a 1981 model, which were still fine despite over 30 years in tropical Cairns. They were just a little dusty, suggesting the seal wasn't perfect.

I don't know what year the rectangular headlights were introduced -- 1981 must be near the beginning?
__________________
Present: 1990 240GL saloon, 1992 240 estate
Past: 1988 240GL; 1971 144DL; 1972 145DL
DW42 is offline   Reply With Quote
Old Aug 26th, 2017, 10:35   #6
Clan
Experienced Member
 
Clan's Avatar
 

Last Online: Yesterday 22:26
Join Date: Jun 2007
Location: L/H side
Default

Quote:
Originally Posted by DW42 View Post
I don't know how well the new aftermarket headlight reflectors hold up. When looking for used reflectors, the earlier ones seem to be less prone to corrosion than the later ones. The reflectors on my 1990 were very corroded, and I replaced them with reflectors off a 1981 model, which were still fine despite over 30 years in tropical Cairns. They were just a little dusty, suggesting the seal wasn't perfect.

I don't know what year the rectangular headlights were introduced -- 1981 must be near the beginning?
Yes 1981 model year was the first of the late style headlights , Parts and material quality then was far higher than even today's recent models
__________________
My comments are only based on my opinions and vast experience .
Clan is offline   Reply With Quote
The Following User Says Thank You to Clan For This Useful Post:
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 03:27.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.